HECO-TOPIX-plus 4,5 x 50, wood panel screw, countersunk head, HECO-Drive, VFT, A3K, 200 pcs.
Properties:
Product number:
60722
GTIN:
4019787607223
Properties:
Product information "HECO-TOPIX-plus 4,5 x 50, wood panel screw, countersunk head, HECO-Drive, VFT, A3K, 200 pcs."
The HECO-TOPIX-plus wood panel screw can be adjusted quickly and easily and fixes panel-type materials permanently and flush with the underlying construction. With the HECO-TOPIX-plus wood panel screw, floor fitters can benefit from the contraction effect of this patented full-threaded screw. The decreasing thread pitch on this fully-threaded screw automatically pulls the components together and fixes them with the thread. This means that the boards can be laid quickly and efficiently onto a level substrate, because they are permanently and securely fixed to the underlying wooden construction. Thanks to the HECO-TOPIX-tip the wood panel screw grips immediately, particularly on hard surfaces such as oriented strand board (OSB) or chipboard and facilitates faster installation than with standard screws. The countersunk head with its patented cutting ribs is easy to screw in and forms a neat flush finish with the board surface.
| Randabstand, a1,CG: | ETA-19/0553 |
|---|---|
| Randabstand, a2,CG: | ETA-19/0553 |
| Streckgrenze, fy,k [N/mm2]: | 900 |
| Zugtragfaehigkeit, ftens,k [kN]: | 5,6 |
| Max. Einschraubdrehmoment [Nm]: | 3 |
| Schaftdurchmesser, ds [mm]: | 3,2 |
| Kopfdurchziehparameter in Nadelholz und Holzwerkstoffen, bei pa 350 kg/m3 und t > 20 mm [N/mm2]: | 14 |
| Diameter, d [mm]: | 4,5 |
| Kopfdurchziehparameter in Holzwerkstoffen, bei pa 350 kg/m3 und t = 12 mm [N/mm2]: | 8 |
| Gewindeauszug in LVL Buche, Baubuche, bei pa 730 kg/m3, fax,k [N/mm2]: | – |
| Fließmoment, My,k [Nm]: | 4,5 |
| Gewindeauszug in Span- und Grobspanplatten OSB, bei pa 600 kg/m3, fax,k [N/mm2]: | 10 |
| Gewindeauszug in Nadelholz masiv, bei pa 350 kg/m3, fax,k [N/mm2]: | 11,8 |
| Kerndurchmesser, d1 [mm]: | 2,7 |
| Kopfdurchziehparameter in Esche, Buche, Eiche, bei pa 350 kg/m3 und t > 20 mm [N/mm2]: | 20 |
| Kopfdurchziehparameter in LVL Buche, Baubuche (ETA-14/0354), bei pa 350 kg/m3 und t ≥ 12 mm [N/mm2]: | 32 |
| Korrosionschutz Mindestdicke [μm]: | 8 |
| Length, l [mm]: | 50 |
| Steigung, P [mm]: | 3,1 |
| Thread length, lg [mm]: | 45 |
| Verschiebungsmodul in Laubholz, Kser [N/mm]: | 6075 |
| Verschiebungsmodul in Nadelholz, Kser [N/mm]: | 5062,5 |
| Headdiameter, dk [mm]: | 8,9 |
| Achsabstand, a1: | ETA-19/0553 |
| Achsabstand, a2: | ETA-19/0553 |
| Biegewinkel, αbend [°]: | 35,7023174 |
| Bruchdrehmoment, ftor,k [Nm]: | 4,5 |
| Brandschutz Leistungsklasse A1 (EN13501): | Ja |
| Head form: | wood panel screw, countersunk head with milling grooves |
| Thread: | variable full thread |
| Size of recess: | HD-20 |
| Recess: | HECO-Drive |
| Material: | Steel, bright zinc plated, A3K |
| Packaged quantity: | 200 |
Login
Product description
The HECO-TOPIX-plus wood panel screw can be adjusted quickly and easily and fixes panel-type materials permanently and flush with the underlying construction. With the HECO-TOPIX-plus wood panel screw, floor fitters can benefit from the contraction effect of this patented full-threaded screw. The decreasing thread pitch on this fully-threaded screw automatically pulls the components together and fixes them with the thread. This means that the boards can be laid quickly and efficiently onto a level substrate, because they are permanently and securely fixed to the underlying wooden construction. Thanks to the HECO-TOPIX-tip the wood panel screw grips immediately, particularly on hard surfaces such as oriented strand board (OSB) or chipboard and facilitates faster installation than with standard screws. The countersunk head with its patented cutting ribs is easy to screw in and forms a neat flush finish with the board surface.
Your benefits
- GripFit: One-handed working possible thanks to the HECO-Drive. Holds the stainless steel screws securely on the bit.
- Easy positioning and quick assembling especially on hard surfaces
- No creaking of the boards due to the HECO-TOPIX-plus full-threaded fixation
- PerfectPitch: Optimal thread pitch for every screw length. Perfect performance for any wood application.
- HECO-TOPIX tip does away with the need for pre-drilling, reduces the risk of the wood splitting and enables narrow edge and centre distances.
- Countersunk head with milling grooves: Excellent milling properties in wood
- Approved and monitored product
Technical data
| GTIN/EAN: | 4019787607223 |
|---|---|
| Product number: | 60722 |
| Diameter, d [mm]: | 4,5 |
| Length, l [mm]: | 50 |
| Thread length, lg [mm]: | 45 |
| Headdiameter, dk [mm]: | 8,9 |
| Head form: | wood panel screw, countersunk head with milling grooves |
| Thread: | variable full thread |
| Size of recess: | HD-20 |
| Recess: | HECO-Drive |
| Material: | Steel, bright zinc plated, A3K |
| Packaged quantity: | 200 |
Certificates
| European technical assessment: | ETA-19/0553 |
|---|---|
| SKH-approval: | Yes |
Accesories
HECO-ClicFix quick change tool holder
HECO-ClicFix quick change tool holder
Product number: 48541
The magnetic HECO-ClicFix quick change tool holder ensures a fast and easy inclusion and secure holding of the bit.
Bits, HECO-Drive, HD-20, orange, 10 pcs.
Bits, HECO-Drive, HD-20, orange, 10 pcs.
Length, l [mm]:
25
|
Size of recess:
HD-20
|
Packaged quantity:
10
Product number: 57095
At the construction site, every bit of help is welcome, and work is much easier when
you have a free hand. So having magnetic bits that hold the screw on the tool are a
huge help. And what’s even better; this is now possible with stainless steel screws too.
Thanks to the HECO-Drive with GripFit effect.
The perfectly coordinated system works mechanically, not magnetically: The bit has a
slightly conical shape, which means that the screw is held onto the bit through friction –
permitting you to carry out your work easily with one hand. With HECO-ClicFix, the
bit is held securely in the machine and can be quickly replaced. HD bits and T-Drive bits
are both compatible with HD screws and T-Drive screws.
Long bits, HECO-Drive, HD-20, orange, 3 pcs.
Long bits, HECO-Drive, HD-20, orange, 3 pcs.
Length, l [mm]:
70
|
Size of recess:
HD-20
|
Packaged quantity:
3
Product number: 57101
At the construction site, every bit of help is welcome, and work is much easier when you have a free hand. So having magnetic bits that hold the screw on the tool are a huge help. And what’s even better; this is now possible with stainless steel screws too. Thanks to the HECO-Drive with GripFit effect. The perfectly coordinated system works mechanically, not magnetically: The bit has a slightly conical shape, which means that the screw is held onto the bit through friction – permitting you to carry out your work easily with one hand. With HECO-ClicFix, the bit is held securely in the machine and can be quickly replaced. HD bits and T-Drive bits are both compatible with HD screws and T-Drive screws.
HECO-Bit-Selector, Pozi- and HECO-Drive, 11 parts
HECO-Bit-Selector, Pozi- and HECO-Drive, 11 parts
Variant:
HECO-Bit-Selector, Pozi- and HECO-Drive, 11 parts
Product number: 57107
At the construction site, every bit of help is welcome, and work is much easier when you have a free hand. So having magnetic bits that hold the screw on the tool are a huge help. And what’s even better; this is now possible with stainless steel screws too. Thanks to the HECO-Drive with GripFit effect. The perfectly coordinated system works mechanically, not magnetically: The bit has a slightly conical shape, which means that the screw is held onto the bit through friction – permitting you to carry out your work easily with one hand. With HECO-ClicFix, the bit is held securely in the machine and can be quickly replaced. HD bits and T-Drive bits are both compatible with HD screws and T-Drive screws.
HECO-MagicFlip magnetic bit holder 1 pce.
HECO-MagicFlip magnetic bit holder 1 pce.
Product number: 57715
When inserting wood construction screws, there is often the problem that the guide is not ideal due to the length of the screw. Thanks to a strong ring magnet, the HECO MagicFlip securely holds even heavy screws and thus allows one-handed working. As soon as the screw is flush with the material surface, the sleeve springs back and makes the screw head visible so that the screw can be sunk deeper if necessary. To deactivate the ring magnet, the sleeve can also be pushed back manually. The MagicFlip is suitable for C 6.3 bits.
HECO-Bit-Selector, HECO-Drive, 11 parts
HECO-Bit-Selector, HECO-Drive, 11 parts
Variant:
HECO-Bit-Selector, HECO-Drive, 11 parts
Product number: 58561
At the construction site, every bit of help is welcome, and work is much easier when you have a free hand. So having magnetic bits that hold the screw on the tool are a huge help. And what’s even better; this is now possible with stainless steel screws too. Thanks to the HECO-Drive with GripFit effect. The perfectly coordinated system works mechanically, not magnetically: The bit has a slightly conical shape, which means that the screw is held onto the bit through friction – permitting you to carry out your work easily with one hand. With HECO-ClicFix, the bit is held securely in the machine and can be quickly replaced. HD bits and T-Drive bits are both compatible with HD screws and T-Drive screws.
Bits, HECO-Drive, HD-20, orange, 2 pcs.
Bits, HECO-Drive, HD-20, orange, 2 pcs.
Length, l [mm]:
25
|
Size of recess:
HD-20
|
Packaged quantity:
2
Product number: 59156
At the construction site, every bit of help is welcome, and work is much easier when you have a free hand. So having magnetic bits that hold the screw on the tool are a huge help. And what’s even better; this is now possible with stainless steel screws too. Thanks to the HECO-Drive with GripFit effect. The perfectly coordinated system works mechanically, not magnetically: The bit has a slightly conical shape, which means that the screw is held onto the bit through friction – permitting you to carry out your work easily with one hand. With HECO-ClicFix, the bit is held securely in the machine and can be quickly replaced. HD bits and T-Drive bits are both compatible with HD screws and T-Drive screws.