HECO-TOPIX-plus A2 4,5 x 50, cladding screw, raised countersunk head, HECO-Drive, VFT, 200 pcs.
Properties:
Product number:
61706
GTIN:
4019787617062
Properties:
Product information "HECO-TOPIX-plus A2 4,5 x 50, cladding screw, raised countersunk head, HECO-Drive, VFT, 200 pcs."
The full thread of the HECO-TOPIX-plus Cladding screw with its variable thread pitch reliably draws the façade boards onto the sub-structure without the head having to be countersunk deep into the timber. The façade is secured axially via the thread, which increases the pull-out strength. This results in fewer fastening points and an ultimately more economical façade construction. Thanks to the full thread, the sole function of the head is to fit the screw drive. As such, the HECO-TOPIX-plus façade screw has a small raised head, which allows simple, concealed installation preventing any water penetration through the screw. The screws are made of stainless steel A2, which safely eliminates the problem of corrosion caused by exposure to weather – for instance, rusting screws.
| Randabstand, a1,CG: | ETA-19/0553 |
|---|---|
| Randabstand, a2,CG: | ETA-19/0553 |
| Streckgrenze, fy,k [N/mm2]: | 900 |
| Zugtragfaehigkeit, ftens,k [kN]: | 5,3 |
| Max. Einschraubdrehmoment [Nm]: | 2,73333333 |
| Schaftdurchmesser, ds [mm]: | 3,35 |
| Kopfdurchziehparameter in Nadelholz und Holzwerkstoffen, bei pa 350 kg/m3 und t > 20 mm [N/mm2]: | 14 |
| Diameter, d [mm]: | 4,5 |
| Kopfdurchziehparameter in Holzwerkstoffen, bei pa 350 kg/m3 und t = 12 mm [N/mm2]: | 8 |
| Gewindeauszug in LVL Buche, Baubuche, bei pa 730 kg/m3, fax,k [N/mm2]: | – |
| Fließmoment, My,k [Nm]: | 3,7 |
| Gewindeauszug in Span- und Grobspanplatten OSB, bei pa 600 kg/m3, fax,k [N/mm2]: | 10 |
| Gewindeauszug in Nadelholz masiv, bei pa 350 kg/m3, fax,k [N/mm2]: | 11,8 |
| Kerndurchmesser, d1 [mm]: | 3 |
| Kopfdurchziehparameter in Esche, Buche, Eiche, bei pa 350 kg/m3 und t > 20 mm [N/mm2]: | 20 |
| Kopfdurchziehparameter in LVL Buche, Baubuche (ETA-14/0354), bei pa 350 kg/m3 und t ≥ 12 mm [N/mm2]: | 32 |
| Korrosionschutz Mindestdicke [μm]: | – |
| Length, l [mm]: | 50 |
| Steigung, P [mm]: | 3,1 |
| Thread length, lg [mm]: | 45 |
| Verschiebungsmodul in Laubholz, Kser [N/mm]: | 6075 |
| Verschiebungsmodul in Nadelholz, Kser [N/mm]: | 5062,5 |
| Headdiameter, dk [mm]: | 7,2 |
| Achsabstand, a1: | ETA-19/0553 |
| Achsabstand, a2: | ETA-19/0553 |
| Biegewinkel, αbend [°]: | 35,7023174 |
| Bruchdrehmoment, ftor,k [Nm]: | 4,1 |
| Brandschutz Leistungsklasse A1 (EN13501): | Ja |
| Head form: | cladding screw, raised countersunk head |
| Thread: | variable full thread |
| Size of recess: | HD-20 |
| Recess: | HECO-Drive |
| Material: | Stainless steel A2, self-colour |
| Packaged quantity: | 200 |
Login
Product description
The full thread of the HECO-TOPIX-plus Cladding screw with its variable thread pitch reliably draws the façade boards onto the sub-structure without the head having to be countersunk deep into the timber. The façade is secured axially via the thread, which increases the pull-out strength. This results in fewer fastening points and an ultimately more economical façade construction. Thanks to the full thread, the sole function of the head is to fit the screw drive. As such, the HECO-TOPIX-plus façade screw has a small raised head, which allows simple, concealed installation preventing any water penetration through the screw. The screws are made of stainless steel A2, which safely eliminates the problem of corrosion caused by exposure to weather – for instance, rusting screws.
Your benefits
- Mounting and fixation of cladding with just one screw
- Permanent fixation and increased pull out values thanks to the HECO-TOPIX-plus full thread
- Small raised countersunk head for neat optics and reduction of trapped moisture
- HECO-TOPIX tip does away with the need for pre-drilling, reduces the risk of the wood splitting and enables narrow edge and centre distances.
- GripFit: One-handed working possible thanks to the HECO-Drive. Holds the stainless steel screws securely on the bit.
- Gapless joining of cladding
- Approved and monitored product
Technical data
| GTIN/EAN: | 4019787617062 |
|---|---|
| Product number: | 61706 |
| Diameter, d [mm]: | 4,5 |
| Length, l [mm]: | 50 |
| Thread length, lg [mm]: | 45 |
| Headdiameter, dk [mm]: | 7,2 |
| Head form: | cladding screw, raised countersunk head |
| Thread: | variable full thread |
| Size of recess: | HD-20 |
| Recess: | HECO-Drive |
| Material: | Stainless steel A2, self-colour |
| Packaged quantity: | 200 |
Certificates
| European technical assessment: | ETA-19/0553 |
|---|---|
| SKH-approval: | Yes |
Accesories
HECO-ClicFix quick change tool holder
HECO-ClicFix quick change tool holder
Product number: 48541
The magnetic HECO-ClicFix quick change tool holder ensures a fast and easy inclusion and secure holding of the bit.
Bits, HECO-Drive, HD-20, orange, 10 pcs.
Bits, HECO-Drive, HD-20, orange, 10 pcs.
Length, l [mm]:
25
|
Size of recess:
HD-20
|
Packaged quantity:
10
Product number: 57095
At the construction site, every bit of help is welcome, and work is much easier when
you have a free hand. So having magnetic bits that hold the screw on the tool are a
huge help. And what’s even better; this is now possible with stainless steel screws too.
Thanks to the HECO-Drive with GripFit effect.
The perfectly coordinated system works mechanically, not magnetically: The bit has a
slightly conical shape, which means that the screw is held onto the bit through friction –
permitting you to carry out your work easily with one hand. With HECO-ClicFix, the
bit is held securely in the machine and can be quickly replaced. HD bits and T-Drive bits
are both compatible with HD screws and T-Drive screws.
Long bits, HECO-Drive, HD-20, orange, 3 pcs.
Long bits, HECO-Drive, HD-20, orange, 3 pcs.
Length, l [mm]:
70
|
Size of recess:
HD-20
|
Packaged quantity:
3
Product number: 57101
At the construction site, every bit of help is welcome, and work is much easier when you have a free hand. So having magnetic bits that hold the screw on the tool are a huge help. And what’s even better; this is now possible with stainless steel screws too. Thanks to the HECO-Drive with GripFit effect. The perfectly coordinated system works mechanically, not magnetically: The bit has a slightly conical shape, which means that the screw is held onto the bit through friction – permitting you to carry out your work easily with one hand. With HECO-ClicFix, the bit is held securely in the machine and can be quickly replaced. HD bits and T-Drive bits are both compatible with HD screws and T-Drive screws.
HECO-Bit-Selector, Pozi- and HECO-Drive, 11 parts
HECO-Bit-Selector, Pozi- and HECO-Drive, 11 parts
Variant:
HECO-Bit-Selector, Pozi- and HECO-Drive, 11 parts
Product number: 57107
At the construction site, every bit of help is welcome, and work is much easier when you have a free hand. So having magnetic bits that hold the screw on the tool are a huge help. And what’s even better; this is now possible with stainless steel screws too. Thanks to the HECO-Drive with GripFit effect. The perfectly coordinated system works mechanically, not magnetically: The bit has a slightly conical shape, which means that the screw is held onto the bit through friction – permitting you to carry out your work easily with one hand. With HECO-ClicFix, the bit is held securely in the machine and can be quickly replaced. HD bits and T-Drive bits are both compatible with HD screws and T-Drive screws.
HECO-MagicFlip magnetic bit holder 1 pce.
HECO-MagicFlip magnetic bit holder 1 pce.
Product number: 57715
When inserting wood construction screws, there is often the problem that the guide is not ideal due to the length of the screw. Thanks to a strong ring magnet, the HECO MagicFlip securely holds even heavy screws and thus allows one-handed working. As soon as the screw is flush with the material surface, the sleeve springs back and makes the screw head visible so that the screw can be sunk deeper if necessary. To deactivate the ring magnet, the sleeve can also be pushed back manually. The MagicFlip is suitable for C 6.3 bits.
HECO-Bit-Selector, HECO-Drive, 11 parts
HECO-Bit-Selector, HECO-Drive, 11 parts
Variant:
HECO-Bit-Selector, HECO-Drive, 11 parts
Product number: 58561
At the construction site, every bit of help is welcome, and work is much easier when you have a free hand. So having magnetic bits that hold the screw on the tool are a huge help. And what’s even better; this is now possible with stainless steel screws too. Thanks to the HECO-Drive with GripFit effect. The perfectly coordinated system works mechanically, not magnetically: The bit has a slightly conical shape, which means that the screw is held onto the bit through friction – permitting you to carry out your work easily with one hand. With HECO-ClicFix, the bit is held securely in the machine and can be quickly replaced. HD bits and T-Drive bits are both compatible with HD screws and T-Drive screws.
Bits, HECO-Drive, HD-20, orange, 2 pcs.
Bits, HECO-Drive, HD-20, orange, 2 pcs.
Length, l [mm]:
25
|
Size of recess:
HD-20
|
Packaged quantity:
2
Product number: 59156
At the construction site, every bit of help is welcome, and work is much easier when you have a free hand. So having magnetic bits that hold the screw on the tool are a huge help. And what’s even better; this is now possible with stainless steel screws too. Thanks to the HECO-Drive with GripFit effect. The perfectly coordinated system works mechanically, not magnetically: The bit has a slightly conical shape, which means that the screw is held onto the bit through friction – permitting you to carry out your work easily with one hand. With HECO-ClicFix, the bit is held securely in the machine and can be quickly replaced. HD bits and T-Drive bits are both compatible with HD screws and T-Drive screws.