HECO-TOPIX-plus-T Solar A2 8,0 x 240, falnge head, T-Drive, ST, 50 pcs.
Properties:
Product number:
61882
GTIN:
4019787618823
Properties:
Product information "HECO-TOPIX-plus-T Solar A2 8,0 x 240, falnge head, T-Drive, ST, 50 pcs."
The HECO-TOPIX-plus-T Solar in A2 stainless steel ensures a long-lasting and economical mounting of solar brackets on over-rafter-insulated roofs. The HECO-TOPIX-plus-T Solar features two patented wood threads with the same pitch. They guarantee a fixation at defined intervals, where the secondary thread fixes the counter batten and all the loads are transmitted via the thread directly into the rafters. The HECO-TOPIX-plus-T Solar screw is quick and easy to use without predrilling thanks to the patented "TOPIX" tip. The tip also prevents any risk of the counter batten splitting; meaning installation is quick and clean. With the screws flange haed, the roof hook or solar system fitting can be screwed flush and securely to the wood to form a connection that lasts.
| Randabstand, a1,CG: | ETA-19/0553 |
|---|---|
| Randabstand, a2,CG: | ETA-19/0553 |
| Streckgrenze, fy,k [N/mm2]: | – |
| Zugtragfaehigkeit, ftens,k [kN]: | 14 |
| Max. Einschraubdrehmoment [Nm]: | 12 |
| Schaftdurchmesser, ds [mm]: | 6 |
| Kopfdurchziehparameter in Nadelholz und Holzwerkstoffen, bei pa 350 kg/m3 und t > 20 mm [N/mm2]: | 14 |
| Diameter, d [mm]: | 8,0 |
| Kopfdurchziehparameter in Holzwerkstoffen, bei pa 350 kg/m3 und t = 12 mm [N/mm2]: | 8 |
| Gewindeauszug in LVL Buche, Baubuche, bei pa 730 kg/m3, fax,k [N/mm2]: | 35 |
| Fließmoment, My,k [Nm]: | 15 |
| Gewindeauszug in Span- und Grobspanplatten OSB, bei pa 600 kg/m3, fax,k [N/mm2]: | – |
| Gewindeauszug in Nadelholz masiv, bei pa 350 kg/m3, fax,k [N/mm2]: | 11,8 |
| Kerndurchmesser, d1 [mm]: | 5,4 |
| Kopfdurchziehparameter in Esche, Buche, Eiche, bei pa 350 kg/m3 und t > 20 mm [N/mm2]: | 20 |
| Kopfdurchziehparameter in LVL Buche, Baubuche (ETA-14/0354), bei pa 350 kg/m3 und t ≥ 12 mm [N/mm2]: | 32 |
| Korrosionschutz Mindestdicke [μm]: | – |
| Length, l [mm]: | 240 |
| Steigung, P [mm]: | 5,995 |
| Thread length, lg [mm]: | 100 |
| Verschiebungsmodul in Laubholz, Kser [N/mm]: | 24000 |
| Thread length, lg2 [mm]: | 60 |
| Verschiebungsmodul in Nadelholz, Kser [N/mm]: | 20000 |
| Headdiameter, dk [mm]: | 18, 18,0 |
| Achsabstand, a1: | ETA-19/0553 |
| Achsabstand, a2: | ETA-19/0553 |
| Biegewinkel, αbend [°]: | 30,4966211 |
| Bruchdrehmoment, ftor,k [Nm]: | 18 |
| Brandschutz Leistungsklasse A1 (EN13501): | Ja |
| Head form: | flange head |
| Thread: | thread beneath the head |
| Size of recess: | T-40 |
| Recess: | T-Drive |
| Material: | Stainless steel A2, self-colour |
| Packaged quantity: | 50 |
Login
Product description
The HECO-TOPIX-plus-T Solar in A2 stainless steel ensures a long-lasting and economical mounting of solar brackets on over-rafter-insulated roofs. The HECO-TOPIX-plus-T Solar features two patented wood threads with the same pitch. They guarantee a fixation at defined intervals, where the secondary thread fixes the counter batten and all the loads are transmitted via the thread directly into the rafters. The HECO-TOPIX-plus-T Solar screw is quick and easy to use without predrilling thanks to the patented "TOPIX" tip. The tip also prevents any risk of the counter batten splitting; meaning installation is quick and clean. With the screws flange haed, the roof hook or solar system fitting can be screwed flush and securely to the wood to form a connection that lasts.
Your benefits
- For mounting solar brackets on on-rafter insulated roofs
- Secondary thread fixes the counter batten
- Flange head for optimal fixing of the fitting on wood
- HECO-TOPIX tip does away with the need for pre-drilling, reduces the risk of the wood splitting and enables narrow edge and centre distances.
- Stainless steel A2, material no. 1.4567
- Chromium (VI)-free coating
- Approved and monitored product
Technical data
| GTIN/EAN: | 4019787618823 |
|---|---|
| Product number: | 61882 |
| Diameter, d [mm]: | 8,0 |
| Length, l [mm]: | 240 |
| Thread length, lg [mm]: | 100 |
| Thread length, lg2 [mm]: | 60 |
| Headdiameter, dk [mm]: | 18, 18,0 |
| Head form: | flange head |
| Thread: | thread beneath the head |
| Size of recess: | T-40 |
| Recess: | T-Drive |
| Material: | Stainless steel A2, self-colour |
| Packaged quantity: | 50 |
Certificates
| European technical assessment: | ETA-19/0553 |
|---|---|
| SKH-approval: | Yes |
Accesories
HECO-ClicFix quick change tool holder
HECO-ClicFix quick change tool holder
Product number: 48541
The magnetic HECO-ClicFix quick change tool holder ensures a fast and easy inclusion and secure holding of the bit.
Bits, HECO-Drive, HD-40, pink, 10 pcs.
Bits, HECO-Drive, HD-40, pink, 10 pcs.
Length, l [mm]:
25
|
Size of recess:
HD-40
|
Packaged quantity:
10
Product number: 57098
At the construction site, every bit of help is welcome, and work is much easier when
you have a free hand. So having magnetic bits that hold the screw on the tool are a
huge help. And what’s even better; this is now possible with stainless steel screws too.
Thanks to the HECO-Drive with GripFit effect.
The perfectly coordinated system works mechanically, not magnetically: The bit has a
slightly conical shape, which means that the screw is held onto the bit through friction –
permitting you to carry out your work easily with one hand. With HECO-ClicFix, the
bit is held securely in the machine and can be quickly replaced. HD bits and T-Drive bits
are both compatible with HD screws and T-Drive screws.
Long bits, HECO-Drive, HD-40, pink, 3 pcs.
Long bits, HECO-Drive, HD-40, pink, 3 pcs.
Length, l [mm]:
70
|
Size of recess:
HD-40
|
Packaged quantity:
3
Product number: 57103
At the construction site, every bit of help is welcome, and work is much easier when you have a free hand. So having magnetic bits that hold the screw on the tool are a huge help. And what’s even better; this is now possible with stainless steel screws too. Thanks to the HECO-Drive with GripFit effect. The perfectly coordinated system works mechanically, not magnetically: The bit has a slightly conical shape, which means that the screw is held onto the bit through friction – permitting you to carry out your work easily with one hand. With HECO-ClicFix, the bit is held securely in the machine and can be quickly replaced. HD bits and T-Drive bits are both compatible with HD screws and T-Drive screws.
HECO-Bit-Selector, Pozi- and HECO-Drive, 11 parts
HECO-Bit-Selector, Pozi- and HECO-Drive, 11 parts
Variant:
HECO-Bit-Selector, Pozi- and HECO-Drive, 11 parts
Product number: 57107
At the construction site, every bit of help is welcome, and work is much easier when you have a free hand. So having magnetic bits that hold the screw on the tool are a huge help. And what’s even better; this is now possible with stainless steel screws too. Thanks to the HECO-Drive with GripFit effect. The perfectly coordinated system works mechanically, not magnetically: The bit has a slightly conical shape, which means that the screw is held onto the bit through friction – permitting you to carry out your work easily with one hand. With HECO-ClicFix, the bit is held securely in the machine and can be quickly replaced. HD bits and T-Drive bits are both compatible with HD screws and T-Drive screws.
HECO-MagicFlip magnetic bit holder 1 pce.
HECO-MagicFlip magnetic bit holder 1 pce.
Product number: 57715
When inserting wood construction screws, there is often the problem that the guide is not ideal due to the length of the screw. Thanks to a strong ring magnet, the HECO MagicFlip securely holds even heavy screws and thus allows one-handed working. As soon as the screw is flush with the material surface, the sleeve springs back and makes the screw head visible so that the screw can be sunk deeper if necessary. To deactivate the ring magnet, the sleeve can also be pushed back manually. The MagicFlip is suitable for C 6.3 bits.
HECO-Bit-Selector, HECO-Drive, 11 parts
HECO-Bit-Selector, HECO-Drive, 11 parts
Variant:
HECO-Bit-Selector, HECO-Drive, 11 parts
Product number: 58561
At the construction site, every bit of help is welcome, and work is much easier when you have a free hand. So having magnetic bits that hold the screw on the tool are a huge help. And what’s even better; this is now possible with stainless steel screws too. Thanks to the HECO-Drive with GripFit effect. The perfectly coordinated system works mechanically, not magnetically: The bit has a slightly conical shape, which means that the screw is held onto the bit through friction – permitting you to carry out your work easily with one hand. With HECO-ClicFix, the bit is held securely in the machine and can be quickly replaced. HD bits and T-Drive bits are both compatible with HD screws and T-Drive screws.
Bits, HECO-Drive, HD-40, pink, 2 pcs.
Bits, HECO-Drive, HD-40, pink, 2 pcs.
Length, l [mm]:
25
|
Size of recess:
HD-40
|
Packaged quantity:
2
Product number: 59158
At the construction site, every bit of help is welcome, and work is much easier when you have a free hand. So having magnetic bits that hold the screw on the tool are a huge help. And what’s even better; this is now possible with stainless steel screws too. Thanks to the HECO-Drive with GripFit effect. The perfectly coordinated system works mechanically, not magnetically: The bit has a slightly conical shape, which means that the screw is held onto the bit through friction – permitting you to carry out your work easily with one hand. With HECO-ClicFix, the bit is held securely in the machine and can be quickly replaced. HD bits and T-Drive bits are both compatible with HD screws and T-Drive screws.