Product description

The double-threaded screw HECO-TOPIX-plus Therm is specially made for the processing of pressure-soft insulating materials. With its two threads it enables offset-mounting, where the counter batten is fixed by the secondary thread. Wind suction or compressive loads are taken solely by the thread in the counter batten, and are transferred directly into the rafters. This prevents the impressing of the counter batten into the insulation. Compared to conventional fastening applications the HECO-TOPIX-plus Therm provides advantages in handling and material costs. In combination with the HECO-TOPIX-plus CombiConnect it forms an additional system for the efficient on-rafter and facade insulation. Here, the occuring shear loads are taken by a combination of shear block and the HECO-TOPIX-plus CombiConnect. This system requires significantly less fastening points compared to conventional solutions.

Your benefits


  • Pressure forces are conducted directly into the rafters through the under-head thread
  • Increased load capacity thanks to the under-head thread
  • Can be used for common insulation materials
  • HECO-TOPIX tip does away with the need for pre-drilling, reduces the risk of the wood splitting and enables narrow edge and centre distances.
  • PerfectPitch: Optimal thread pitch for every screw length. Perfect performance for any wood application.
  • Calculation certificates via HECO®’s HCS calculation software or calculation service
  • Approved and monitored product

Technical data

GTIN/EAN: 4019787613101
Product number: 61310
Diameter, d [mm]: 8,0
Length, l [mm]: 200
Thread length, lg [mm]: 100
Thread length, lg2 [mm]: 60
Headdiameter, dk [mm]: 14,8
Head form: countersunk head with milling grooves
Thread: secondary thread
Size of recess: HD-40
Recess: HECO-Drive
Material: Steel, bright zinc plated, A3K
Packaged quantity: 50

Certificates

European technical assessment: ETA-19/0553
SKH-approval: Yes

Accesories

The setting tool for HECO-TOPIX® wood screws alows an easy insertion of screws while complying with prescribed setting angles. The durable plastic tool ensures the precise setting of HECO-TOPIX-Therm and HECO-TOPIX-CombiConnect screws with 60° and 45° to the surface.
The magnetic HECO-ClicFix quick change tool holder ensures a fast and easy inclusion and secure holding of the bit.
Length, l [mm]: 25 | Size of recess: HD-40 | Packaged quantity: 10
At the construction site, every bit of help is welcome, and work is much easier when you have a free hand. So having magnetic bits that hold the screw on the tool are a huge help. And what’s even better; this is now possible with stainless steel screws too. Thanks to the HECO-Drive with GripFit effect. The perfectly coordinated system works mechanically, not magnetically: The bit has a slightly conical shape, which means that the screw is held onto the bit through friction – permitting you to carry out your work easily with one hand. With HECO-ClicFix, the bit is held securely in the machine and can be quickly replaced. HD bits and T-Drive bits are both compatible with HD screws and T-Drive screws.
Length, l [mm]: 70 | Size of recess: HD-40 | Packaged quantity: 3
At the construction site, every bit of help is welcome, and work is much easier when you have a free hand. So having magnetic bits that hold the screw on the tool are a huge help. And what’s even better; this is now possible with stainless steel screws too. Thanks to the HECO-Drive with GripFit effect. The perfectly coordinated system works mechanically, not magnetically: The bit has a slightly conical shape, which means that the screw is held onto the bit through friction – permitting you to carry out your work easily with one hand. With HECO-ClicFix, the bit is held securely in the machine and can be quickly replaced. HD bits and T-Drive bits are both compatible with HD screws and T-Drive screws.
Variant: HECO-Bit-Selector, Pozi- and HECO-Drive, 11 parts
At the construction site, every bit of help is welcome, and work is much easier when you have a free hand. So having magnetic bits that hold the screw on the tool are a huge help. And what’s even better; this is now possible with stainless steel screws too. Thanks to the HECO-Drive with GripFit effect. The perfectly coordinated system works mechanically, not magnetically: The bit has a slightly conical shape, which means that the screw is held onto the bit through friction – permitting you to carry out your work easily with one hand. With HECO-ClicFix, the bit is held securely in the machine and can be quickly replaced. HD bits and T-Drive bits are both compatible with HD screws and T-Drive screws.
When inserting wood construction screws, there is often the problem that the guide is not ideal due to the length of the screw. Thanks to a strong ring magnet, the HECO MagicFlip securely holds even heavy screws and thus allows one-handed working. As soon as the screw is flush with the material surface, the sleeve springs back and makes the screw head visible so that the screw can be sunk deeper if necessary. To deactivate the ring magnet, the sleeve can also be pushed back manually. The MagicFlip is suitable for C 6.3 bits.
Variant: HECO-Bit-Selector, HECO-Drive, 11 parts
At the construction site, every bit of help is welcome, and work is much easier when you have a free hand. So having magnetic bits that hold the screw on the tool are a huge help. And what’s even better; this is now possible with stainless steel screws too. Thanks to the HECO-Drive with GripFit effect. The perfectly coordinated system works mechanically, not magnetically: The bit has a slightly conical shape, which means that the screw is held onto the bit through friction – permitting you to carry out your work easily with one hand. With HECO-ClicFix, the bit is held securely in the machine and can be quickly replaced. HD bits and T-Drive bits are both compatible with HD screws and T-Drive screws.
Length, l [mm]: 25 | Size of recess: HD-40 | Packaged quantity: 2
At the construction site, every bit of help is welcome, and work is much easier when you have a free hand. So having magnetic bits that hold the screw on the tool are a huge help. And what’s even better; this is now possible with stainless steel screws too. Thanks to the HECO-Drive with GripFit effect. The perfectly coordinated system works mechanically, not magnetically: The bit has a slightly conical shape, which means that the screw is held onto the bit through friction – permitting you to carry out your work easily with one hand. With HECO-ClicFix, the bit is held securely in the machine and can be quickly replaced. HD bits and T-Drive bits are both compatible with HD screws and T-Drive screws.
Contact
HECO-Topix-Plus
Multi-Monti-Plus