HECO-UFIX 4 x 60, countersunk head, HECO-Drive, HD-20, partial thread, A2K, 200 pieces
Properties:
Product number:
47982
GTIN:
4019787479820
Properties:
Product information "HECO-UFIX 4 x 60, countersunk head, HECO-Drive, HD-20, partial thread, A2K, 200 pieces"
The HECO-UFIX® is a part-threaded screw with a special shaped spade-like drilling point. It has all the properties required for working with medium-density fibreboard: predrilling effect and pinpoint-accurate insertion, reduced splitting and low driving torque. Another advantage is that the HECO-UFIX MDF screw has a newly developed drive: the HECO-Drive, a perfectly coordinated system between drive in the screw and the special HD bit. The screws stick-fit into the bit and do not wobble. This allows for one-handed operation without any problems and exact screw guidance. However, the screw is also compatible with any standard T-Drive bit.
| Diameter, d [mm]: | 4 |
|---|---|
| Length, l [mm]: | 60 |
| Thread length, lg [mm]: | 40 |
| Headdiameter, dk [mm]: | 7,3 |
| Head form: | countersunk head with milling grooves |
| Thread: | partial thread |
| Size of recess: | HD-20 |
| Recess: | HECO-Drive |
| Material: | steel, bright zinc plated, A2K |
| Packaged quantity: | 200 |
Login
Product description
The HECO-UFIX® is a part-threaded screw with a special shaped spade-like drilling point. It has all the properties required for working with medium-density fibreboard: predrilling effect and pinpoint-accurate insertion, reduced splitting and low driving torque. Another advantage is that the HECO-UFIX MDF screw has a newly developed drive: the HECO-Drive, a perfectly coordinated system between drive in the screw and the special HD bit. The screws stick-fit into the bit and do not wobble. This allows for one-handed operation without any problems and exact screw guidance. However, the screw is also compatible with any standard T-Drive bit.
Your benefits
- Possible to work close to the edge and axis
- Screw connections possible at the end faces without predrilling
- Enlargement of insertion hole due to ribs on the point of the screw; thus reducing the splitting and bulging of the MDF
- Exact, non-slip positioning on the surface of the material
- Perfectly coordinated HECO-Drive and drive with stick-fit effect; the bit holds the screw securely without wobbling.
- Only one size of recess for the whole product range
Technical data
| GTIN/EAN: | 4019787479820 |
|---|---|
| Product number: | 47982 |
| Diameter, d [mm]: | 4 |
| Length, l [mm]: | 60 |
| Thread length, lg [mm]: | 40 |
| Headdiameter, dk [mm]: | 7,3 |
| Head form: | countersunk head with milling grooves |
| Thread: | partial thread |
| Size of recess: | HD-20 |
| Recess: | HECO-Drive |
| Material: | steel, bright zinc plated, A2K |
| Packaged quantity: | 200 |