MULTI-MONTI-plus P A4 7.5 x 75, pan head, T-30, self-coloured, 50 pieces
Properties:
Product number:
52782
GTIN:
4019787527828
Properties:
Product information "MULTI-MONTI-plus P A4 7.5 x 75, pan head, T-30, self-coloured, 50 pieces"
The MULTI-MONTI®-plus A4 (MMS-plus A4) screw anchor is an enhancement of the MULTI-MONTI® A4 concrete screw. It is driven directly into a predrilled hole without a dowel and has load-bearing strength right from the word go. The reinforced toothing on the screw tip cuts an internal thread in the material during insertion. This creates a positive locking connection, which is subsequently used for the anchoring. This not only facilitates the installation procedure, but also guarantees the craftsman a high level of application safety. The MULTI-MONTI®-plus A4 concrete screw can be driven in close to the edge and without a torque wrench and is completely removable.
| Diameter of clearance hole in the fixture, df [mm]: | 9 |
|---|---|
| Embedment, hnom reduced [mm]: | 65/50/35 |
| Embedment, hnom standard [mm]: | 55/40 |
| Empfohlene max. Leistungsabgabe des Schlagschraubers, Tmax2 [Nm]: | 185 |
| Min. edge distance, cmin [mm]: | 30 |
| Minimal thickness of concrete member, hmin [mm]: | 100 |
| Recommended max. power output of the impact screw driver, Tmax1 [Nm]: | 200 |
| Diameter, d [mm]: | 7,5 |
| Length, l [mm]: | 75 |
| Thread length, lg [mm]: | 59 |
| Headdiameter, dk [mm]: | 13,6 |
| Clamping strength, tfix standard [mm]: | 20/35 |
| Clamping strength, tfix reduced [mm]: | 10/25/40 |
| Drill diameter, d0 [mm]: | 6 |
| Drill hole depth, h standard [mm]: | 60/45 |
| Drill hole depth, h reduced [mm]: | 75/55/40 |
| Head form: | pan head |
| Thread: | concrete thread with serrated tip |
| Size of recess: | T-30 |
| Recess: | T-Drive |
| Material: | stainless steel A4, self-colour, tip phosphated |
| Packaged quantity: | 50 |
Login
Product description
The MULTI-MONTI®-plus A4 (MMS-plus A4) screw anchor is an enhancement of the MULTI-MONTI® A4 concrete screw. It is driven directly into a predrilled hole without a dowel and has load-bearing strength right from the word go. The reinforced toothing on the screw tip cuts an internal thread in the material during insertion. This creates a positive locking connection, which is subsequently used for the anchoring. This not only facilitates the installation procedure, but also guarantees the craftsman a high level of application safety. The MULTI-MONTI®-plus A4 concrete screw can be driven in close to the edge and without a torque wrench and is completely removable.
Your benefits
- Very high load capacities
- Easy insertion
- Up to six embedment depths for more flexibility
- Settable by means of power-tools and immediately loadbearing
- No dowels required
- Functionele punt gefosfateerd: voor een zekere achtersnijding in het beton
- A4 1.4401 stainless steel, ideal for applications in damp rooms and exposed outdoor areas
Technical data
| GTIN/EAN: | 4019787527828 |
|---|---|
| Product number: | 52782 |
| Diameter of clearance hole in the fixture, df [mm]: | 9 |
| Embedment, hnom reduced [mm]: | 65/50/35 |
| Embedment, hnom standard [mm]: | 55/40 |
| Empfohlene max. Leistungsabgabe des Schlagschraubers, Tmax2 [Nm]: | 185 |
| Min. edge distance, cmin [mm]: | 30 |
| Minimal thickness of concrete member, hmin [mm]: | 100 |
| Recommended max. power output of the impact screw driver, Tmax1 [Nm]: | 200 |
| Diameter, d [mm]: | 7,5 |
| Length, l [mm]: | 75 |
| Thread length, lg [mm]: | 59 |
| Headdiameter, dk [mm]: | 13,6 |
| Clamping strength, tfix standard [mm]: | 20/35 |
| Clamping strength, tfix reduced [mm]: | 10/25/40 |
| Drill diameter, d0 [mm]: | 6 |
| Drill hole depth, h standard [mm]: | 60/45 |
| Drill hole depth, h reduced [mm]: | 75/55/40 |
| Head form: | pan head |
| Thread: | concrete thread with serrated tip |
| Size of recess: | T-30 |
| Recess: | T-Drive |
| Material: | stainless steel A4, self-colour, tip phosphated |
| Packaged quantity: | 50 |
Certificates
| European technical assessment: | ETA-15/0784 |
|---|---|
| Fire-resistance rating: | F120/R120 |
| Sprinkler-approval: | Yes |
