MULTI-MONTI-plus SSK 16,0 x 130, hexagon head with washer and cone, A2K, 10 pcs.
Properties:
Product number:
53794
GTIN:
4019787537940
Properties:
Product information "MULTI-MONTI-plus SSK 16,0 x 130, hexagon head with washer and cone, A2K, 10 pcs."
The screw anchor MULTI-MONTI-plus (MMS-plus), is an enhancement of the concrete screw MULTI-MONTI. Without the need for wall plugs, the certified screw anchor is driven directly into a pre-drilled hole, where it is immediately loadable. Its reinforced toothed concrete thread cuts an internal thread into the building material. This creates a positive locking connection, which is subsequently used for the anchoring.The MULTI-MONTI-plus system is not only fast and easy to mount, but also ensures a secure connection. This is confirmed by the available ETA-certification. The screws can be mounted close to the edge and without a torque wrench, what´s more they can be removed and reused after checking the threads condition.
| Diameter of clearance hole in the fixture, df [mm]: | 19 |
|---|---|
| Embedment, hnom standard [mm]: | 115/100 |
| Min. edge distance, cmin [mm]: | 60 |
| Recommended max. power output of the impact screw driver, Tmax1 [Nm]: | 600 |
| Diameter, d [mm]: | 16,0 |
| Length, l [mm]: | 130 |
| Thread length, lg [mm]: | 115 |
| Headdiameter, dk [mm]: | 30,0 |
| Clamping strength, tfix standard [mm]: | 15/30 |
| Drill diameter, d0 [mm]: | 14,0 |
| Drill hole depth, h standard [mm]: | 125/110 |
| Head form: | hexagon head with combined washer and cone, SW-24 |
| Thread: | concrete thread |
| Size of recess: | SW-24 |
| Recess: | hexagon head |
| Material: | Steel, bright zinc plated, A2K |
| Packaged quantity: | 10 |
Login
Product description
The screw anchor MULTI-MONTI-plus (MMS-plus), is an enhancement of the concrete screw MULTI-MONTI. Without the need for wall plugs, the certified screw anchor is driven directly into a pre-drilled hole, where it is immediately loadable. Its reinforced toothed concrete thread cuts an internal thread into the building material. This creates a positive locking connection, which is subsequently used for the anchoring.The MULTI-MONTI-plus system is not only fast and easy to mount, but also ensures a secure connection. This is confirmed by the available ETA-certification. The screws can be mounted close to the edge and without a torque wrench, what´s more they can be removed and reused after checking the threads condition.
Your benefits
- Temporary fastenings of site equipment for example props, push-pull props, guardrails or scaffolding
- Dissassembling and reusability is permitted when using checking gauge
- Approved for the use in young concrete with a compression strength of at least fc,cube > 10 N/mm²
- Clearance hole diameters from 17 – 23mm in bracings can be covered with one screw
- Settings can be carried out with machines as no defined installation torque is required
- No expansion pressure
- Safely applicable as no hidden mounting errors can occur
Technical data
| GTIN/EAN: | 4019787537940 |
|---|---|
| Product number: | 53794 |
| Diameter of clearance hole in the fixture, df [mm]: | 19 |
| Embedment, hnom standard [mm]: | 115/100 |
| Min. edge distance, cmin [mm]: | 60 |
| Recommended max. power output of the impact screw driver, Tmax1 [Nm]: | 600 |
| Diameter, d [mm]: | 16,0 |
| Length, l [mm]: | 130 |
| Thread length, lg [mm]: | 115 |
| Headdiameter, dk [mm]: | 30,0 |
| Clamping strength, tfix standard [mm]: | 15/30 |
| Drill diameter, d0 [mm]: | 14,0 |
| Drill hole depth, h standard [mm]: | 125/110 |
| Head form: | hexagon head with combined washer and cone, SW-24 |
| Thread: | concrete thread |
| Size of recess: | SW-24 |
| Recess: | hexagon head |
| Material: | Steel, bright zinc plated, A2K |
| Packaged quantity: | 10 |
Certificates
| European technical assessment: | ETA-15/0784 |
|---|---|
| German DIBt-approval: | Z-21.8-2061 |
| Fire-resistance rating: | F120/R120 |
| Sprinkler-approval: | Yes |
| Approved seismic action category: | C1 & C2 |
Accesories
HECO-gauge for checking reusability of MULTI-MONTI-plus Ø16
HECO-gauge for checking reusability of MULTI-MONTI-plus Ø16
Variant:
HECO-gauge for checking reusability of MULTI-MONTI-plus Ø16
Product number: 47794
The HECO-gauges allow a control of MULTI-MONTI-plus screws for reusability, when using them as temporary fastenings. The stainless steel gauge is used for abrasion control of thread diamaters 10 to 20mm.