Filter
Filter
–
15
Products
MULTI-MONTI-plus SS, hexagon head with combined washer
MULTI-MONTI-plus SS 10 x 80, hexagon head with washer, SW-13, A2K, 25 pieces
Diameter, d [mm]:
10
|
Length, l [mm]:
80
|
Size of recess:
SW-13
|
Material:
steel, bright zinc plated, A2K
|
Packaged quantity:
25
Product number: 48403
The screw anchor MULTI-MONTI-plus (MMS-plus), is an enhancement of the concrete screw MULTI-MONTI. Without the need for wall plugs, the certified screw anchor is driven directly into a pre-drilled hole, where it is immediately loadable. Its reinforced toothed concrete thread cuts an internal thread into the building material. This creates a positive locking connection, which is subsequently used for the anchoring.The MULTI-MONTI-plus system is not only fast and easy to mount, but also ensures a secure connection. This is confirmed by the available ETA-certification. The screws can be mounted close to the edge and without a torque wrench, what´s more they can be removed and reused after checking the threads condition. It is approved for use in concrete and masonry and for use in fire conditions.
MULTI-MONTI-plus F, countersunk head
MULTI-MONTI-plus F 7.5 x 80, countersunk head, T-40, A2K, 50 pieces
Diameter, d [mm]:
7,5
|
Length, l [mm]:
80
|
Size of recess:
T-40
|
Material:
steel, bright zinc plated, A2K
|
Packaged quantity:
50
Product number: 48515
The screw anchor MULTI-MONTI-plus (MMS-plus), is an enhancement of the concrete screw MULTI-MONTI. Without the need for wall plugs, the certified screw anchor is driven directly into a pre-drilled hole, where it is immediately loadable. Its reinforced toothed concrete thread cuts an internal thread into the building material. This creates a positive locking connection, which is subsequently used for the anchoring.The MULTI-MONTI-plus system is not only fast and easy to mount, but also ensures a secure connection. This is confirmed by the available ETA-certification. The screws can be mounted close to the edge and without a torque wrench, what´s more they can be removed and reused after checking the threads condition. It is approved for use in concrete and masonry and for use in fire conditions.
MULTI-MONTI-plus S, Baseplate anchor
MULTI-MONTI-plus S 12 x 200, hexagon head with washer, SW-19, A2K, 25 pieces
Length, l [mm]:
200
Product number: 48465
The screw anchor MULTI-MONTI-plus (MMS-plus), is an enhancement of the concrete screw MULTI-MONTI. Without the need for wall plugs, the certified screw anchor is driven directly into a pre-drilled hole, where it is immediately loadable. Its reinforced toothed concrete thread cuts an internal thread into the building material. This creates a positive locking connection, which is subsequently used for the anchoring.The MULTI-MONTI-plus system is not only fast and easy to mount, but also ensures a secure connection. This is confirmed by the available ETA-certification. The screws can be mounted close to the edge and without a torque wrench, what´s more they can be removed and reused after checking the threads condition. It is approved for use in concrete and masonry and for use in fire conditions.
MULTI-MONTI TimberConnect, wood-concrete connector
MULTI-MONTI-TimberConnect 12 x 160, cylindric head, T-50, A2K, 25 pieces
Diameter, d [mm]:
12
|
Length, l [mm]:
160
|
Size of recess:
T-50
|
Packaged quantity:
25
Product number: 48312
Based on the MULTI-MONTI system, the innovative MULTI-MONTI-TimberConnect (MMS-TC) baseplate anchor combines the patented concrete thread with a HECO wood thread. With the result, that the MMS-TC ensures simple and safe fixing of wooden components on solid masonry and concrete as well as for baseplates on concrete. The baseplate anchor provides all advantages of the MULTI-MONTI concrete thread: no torque control, no spacing and no cure times. The screw head enables the anchor to be countersunk in wood, whilst the dimensions allow attachment thicknesses from 40 to 300 mm. This means that just one type of anchor is sufficient for many applications and thicknesses of wood. The screw anchor can be set in push-through installation using a setting tool. The unique combination of different calculation concepts allows for significantly higher shear and tension loads, which do not depend on the thickness of fixture.
MULTI-MONTI-plus S 16 x 80, hexagon head with washer, SW-24, A2K, 25 pieces
MULTI-MONTI-plus S 16 x 80, hexagon head with washer, SW-24, A2K, 25 pieces
Product number: 54274
The screw anchor MULTI-MONTI-plus (MMS-plus), is an enhancement of the concrete screw MULTI-MONTI. Without the need for wall plugs, the certified screw anchor is driven directly into a pre-drilled hole, where it is immediately loadable. Its reinforced toothed concrete thread cuts an internal thread into the building material. This creates a positive locking connection, which is subsequently used for the anchoring.The MULTI-MONTI-plus system is not only fast and easy to mount, but also ensures a secure connection. This is confirmed by the available ETA-certification. The screws can be mounted close to the edge and without a torque wrench, what´s more they can be removed and reused after checking the threads condition. It is approved for use in concrete and masonry and for use in fire conditions.
MULTI-MONTI-plus I, with internal metric thread
MULTI-MONTI-plus I 7.5 x 40, with internal thread, SW-13, A2K, 40 pieces
Diameter, d [mm]:
7,5
|
Length, l [mm]:
40
|
Size of recess:
SW-13
|
Packaged quantity:
40
Product number: 49833
The screw anchor MULTI-MONTI-plus (MMS-plus), is an enhancement of the concrete screw MULTI-MONTI. Without the need for wall plugs, the certified screw anchor is driven directly into a pre-drilled hole, where it is immediately loadable. Its reinforced toothed concrete thread cuts an internal thread into the building material. This creates a positive locking connection, which is subsequently used for the anchoring.The MULTI-MONTI-plus system is not only fast and easy to mount, but also ensures a secure connection. This is confirmed by the available ETA-certification. The screws can be mounted close to the edge and without a torque wrench, what´s more they can be removed and reused after checking the threads condition. It is approved for use in concrete and masonry and for use in fire conditions.
MULTI-MONTI-plus SSK, Push-pull prop anchor
MULTI-MONTI-plus SSK 16 x 130, push-pull prop anchor, SW-24, A2K, 10 pieces
Length, l [mm]:
130
Product number: 53794
The screw anchor MULTI-MONTI-plus (MMS-plus), is an enhancement of the concrete screw MULTI-MONTI. Without the need for wall plugs, the certified screw anchor is driven directly into a pre-drilled hole, where it is immediately loadable. Its reinforced toothed concrete thread cuts an internal thread into the building material. This creates a positive locking connection, which is subsequently used for the anchoring.The MULTI-MONTI-plus system is not only fast and easy to mount, but also ensures a secure connection. This is confirmed by the available ETA-certification. The screws can be mounted close to the edge and without a torque wrench, what´s more they can be removed and reused after checking the threads condition. It is approved for use in concrete and masonry and for use in fire conditions.
MULTI-MONTI-plus MS, flange head
MULTI-MONTI-plus MS A4 7.5 x 40, mounting rail anchor, T-30, self-coloured, 50 pieces
Length, l [mm]:
40
|
Material:
stainless steel A4, self-colour, tip phosphated
|
Packaged quantity:
50
Product number: 64681
The MULTI-MONTI®-plus A4 (MMS-plus A4) screw anchor is an enhancement of the MULTI-MONTI® A4 concrete screw. It is driven directly into a predrilled hole without a dowel and has load-bearing strength right from the word go. The reinforced toothing on the screw tip cuts an internal thread in the material during insertion. This creates a positive locking connection, which is subsequently used for the anchoring. This not only facilitates the installation procedure, but also guarantees the craftsman a high level of application safety. The MULTI-MONTI®-plus A4 concrete screw can be driven in close to the edge and without a torque wrench and is completely removable.
MULTI-MONTI-plus P, pan head
MULTI-MONTI-plus P A4 7.5 x 75, pan head, T-30, self-coloured, 50 pieces
Diameter, d [mm]:
7,5
|
Length, l [mm]:
75
|
Size of recess:
T-30
|
Material:
stainless steel A4, self-colour, tip phosphated
|
Packaged quantity:
50
Product number: 52782
The MULTI-MONTI®-plus A4 (MMS-plus A4) screw anchor is an enhancement of the MULTI-MONTI® A4 concrete screw. It is driven directly into a predrilled hole without a dowel and has load-bearing strength right from the word go. The reinforced toothing on the screw tip cuts an internal thread in the material during insertion. This creates a positive locking connection, which is subsequently used for the anchoring. This not only facilitates the installation procedure, but also guarantees the craftsman a high level of application safety. The MULTI-MONTI®-plus A4 concrete screw can be driven in close to the edge and without a torque wrench and is completely removable.
MULTI-MONTI-plus KS 5 x 40, cable clamp screw, T-20, A2K, 200 pieces
MULTI-MONTI-plus KS 5 x 40, cable clamp screw, T-20, A2K, 200 pieces
Product number: 54270
The screw anchor MULTI-MONTI-plus (MMS-plus), is an enhancement of the concrete screw MULTI-MONTI. Without the need for wall plugs, the certified screw anchor is driven directly into a pre-drilled hole, where it is immediately loadable. Its reinforced toothed concrete thread cuts an internal thread into the building material. This creates a positive locking connection, which is subsequently used for the anchoring.The MULTI-MONTI-plus system is not only fast and easy to mount, but also ensures a secure connection. This is confirmed by the available ETA-certification. The screws can be mounted close to the edge and without a torque wrench, what´s more they can be removed and reused after checking the threads condition. It is approved for use in concrete and masonry and for use in fire conditions.
MULTI-MONTI-plus ST, with metric stud
MULTI-MONTI-plus ST 6 x 55, with metric stud, SW-10, A2K, 100 pieces
Diameter, d [mm]:
6
|
Length, l [mm]:
55
|
Size of recess:
SW-10
|
Packaged quantity:
100
Product number: 48654
The screw anchor MULTI-MONTI-plus (MMS-plus), is an enhancement of the concrete screw MULTI-MONTI. Without the need for wall plugs, the certified screw anchor is driven directly into a pre-drilled hole, where it is immediately loadable. Its reinforced toothed concrete thread cuts an internal thread into the building material. This creates a positive locking connection, which is subsequently used for the anchoring.The MULTI-MONTI-plus system is not only fast and easy to mount, but also ensures a secure connection. This is confirmed by the available ETA-certification. The screws can be mounted close to the edge and without a torque wrench, what´s more they can be removed and reused after checking the threads condition. It is approved for use in concrete and masonry and for use in fire conditions.
HECO-VB wood-concrete composite screw
HECO-VB 7.5 x 165, VB-48 head, Outside-TX, AT-E8, partial thread, A2K, 100 pieces
Length, l [mm]:
165
Product number: 58842
When renovating, it is often sensible or even necessary to reinforce existing ceilings. The HECO-VB wood-concrete composite system avoids the demolition of existing wooden ceilings and the construction of new concrete structures. Valuable building fabric can thus be preserved and the interesting combination of wood and concrete opens up new design possibilities. The timber beam absorbs the tensile forces, while the concrete acts as a pressure plate. The shear-resistant connection is achieved using single or crossed VB fasteners. This reduces the deflection of the ceiling construction and massively increases the load-bearing capacity. The HECO-VB composite system can now also be used with multi-span beams. At the same time, the fire and sound insulation properties can be significantly improved.
Checking gauges for MULTI-MONTI-plus
HECO-gauge for checking reusability of MULTI-MONTI-plus Ø16
Diameter, d [mm]:
15,5
|
Length, l [mm]:
36
Product number: 47794
The HECO-gauges allow a control of MULTI-MONTI-plus screws for reusability, when using them as temporary fastenings. The stainless steel gauge is used for abrasion control of thread diamaters 10 to 20mm.
MULTI-MONTI-plus V, pre-set anchor with metric stud
MULTI-MONTI-plus V 12 x 120, pre-set anchor, SW-8, A2K, 25 pieces
Diameter, d [mm]:
12
|
Length, l [mm]:
120
|
Size of recess:
SW-8
|
Packaged quantity:
25
Product number: 48680
The screw anchor MULTI-MONTI-plus (MMS-plus), is an enhancement of the concrete screw MULTI-MONTI. Without the need for wall plugs, the certified screw anchor is driven directly into a pre-drilled hole, where it is immediately loadable. Its reinforced toothed concrete thread cuts an internal thread into the building material. This creates a positive locking connection, which is subsequently used for the anchoring.The MULTI-MONTI-plus system is not only fast and easy to mount, but also ensures a secure connection. This is confirmed by the available ETA-certification. The screws can be mounted close to the edge and without a torque wrench, what´s more they can be removed and reused after checking the threads condition. It is approved for use in concrete and masonry and for use in fire conditions.
MULTI-MONTI-plus Therm
MULTI-MONTI-plus Therm 7.5 x 180, cylindric head, T-40, A2K, 50 pieces
Length, l [mm]:
180
Product number: 64059
The MULTI-MONTI®-plus Therm screw anchor was specially developed for fastening counter battens to concrete on insulated roofs. Thanks to its wood-concrete double thread, the screw enables a spacer screw connection between the counter batten and concrete. As a result, all compressive forces are transferred from the counter-batten directly into the concrete without the intervening insulation material being affected by the resulting loads. This significantly increases the service life of the insulation and the load-bearing capacity of the counter battens. The screw anchor can be used for all common insulation materials without any requirement for compressive strength and has ETA approval (ETA-23/0078).