Anchoring in concrete and masonry
Filter
Filter
–
4
Products
MULTI-MONTI-plus SS, hexagon head with combined washer
MULTI-MONTI-plus SS A4 10 x 85, hexagon head with washer, SW-13, self-coloured, 25 pieces
Diameter, d [mm]:
10
|
Length, l [mm]:
85
|
Size of recess:
SW-13
|
Material:
stainless steel A4, self-colour, tip phosphated
|
Packaged quantity:
25
Product number: 56619
The MULTI-MONTI®-plus A4 (MMS-plus A4) screw anchor is an enhancement of the MULTI-MONTI® A4 concrete screw. It is driven directly into a predrilled hole without a dowel and has load-bearing strength right from the word go. The reinforced toothing on the screw tip cuts an internal thread in the material during insertion. This creates a positive locking connection, which is subsequently used for the anchoring. This not only facilitates the installation procedure, but also guarantees the craftsman a high level of application safety. The MULTI-MONTI®-plus A4 concrete screw can be driven in close to the edge and without a torque wrench and is completely removable.
MULTI-MONTI-plus F, countersunk head
MULTI-MONTI-plus F A4 7.5 x 75, countersunk head, T-30, self-coloured, 50 pieces
Diameter, d [mm]:
7,5
|
Length, l [mm]:
75
|
Size of recess:
T-30
|
Material:
stainless steel A4, self-colour, tip phosphated
|
Packaged quantity:
50
Product number: 52788
The MULTI-MONTI®-plus A4 (MMS-plus A4) screw anchor is an enhancement of the MULTI-MONTI® A4 concrete screw. It is driven directly into a predrilled hole without a dowel and has load-bearing strength right from the word go. The reinforced toothing on the screw tip cuts an internal thread in the material during insertion. This creates a positive locking connection, which is subsequently used for the anchoring. This not only facilitates the installation procedure, but also guarantees the craftsman a high level of application safety. The MULTI-MONTI®-plus A4 concrete screw can be driven in close to the edge and without a torque wrench and is completely removable.
MULTI-MONTI-plus MS, flange head
MULTI-MONTI-plus MS A4 7.5 x 40, mounting rail anchor, T-30, self-coloured, 50 pieces
Length, l [mm]:
40
|
Material:
stainless steel A4, self-colour, tip phosphated
|
Packaged quantity:
50
Product number: 64681
The MULTI-MONTI®-plus A4 (MMS-plus A4) screw anchor is an enhancement of the MULTI-MONTI® A4 concrete screw. It is driven directly into a predrilled hole without a dowel and has load-bearing strength right from the word go. The reinforced toothing on the screw tip cuts an internal thread in the material during insertion. This creates a positive locking connection, which is subsequently used for the anchoring. This not only facilitates the installation procedure, but also guarantees the craftsman a high level of application safety. The MULTI-MONTI®-plus A4 concrete screw can be driven in close to the edge and without a torque wrench and is completely removable.
MULTI-MONTI-plus P, pan head
MULTI-MONTI-plus P A4 7.5 x 75, pan head, T-30, self-coloured, 50 pieces
Diameter, d [mm]:
7,5
|
Length, l [mm]:
75
|
Size of recess:
T-30
|
Material:
stainless steel A4, self-colour, tip phosphated
|
Packaged quantity:
50
Product number: 52782
The MULTI-MONTI®-plus A4 (MMS-plus A4) screw anchor is an enhancement of the MULTI-MONTI® A4 concrete screw. It is driven directly into a predrilled hole without a dowel and has load-bearing strength right from the word go. The reinforced toothing on the screw tip cuts an internal thread in the material during insertion. This creates a positive locking connection, which is subsequently used for the anchoring. This not only facilitates the installation procedure, but also guarantees the craftsman a high level of application safety. The MULTI-MONTI®-plus A4 concrete screw can be driven in close to the edge and without a torque wrench and is completely removable.