Filter
Filter
–
4
Products
HECO-TOPIX-plus Cladding screw
HECO-TOPIX-plus A2 4.5 x 50, cladding screw, HD-20, VVG, self-coloured, 200 pieces
Diameter, d [mm]:
4,5
|
Length, l [mm]:
50
Product number: 61706
The full thread of the HECO-TOPIX-plus Cladding screw with its variable thread pitch reliably draws the façade boards onto the sub-structure without the head having to be countersunk deep into the timber. The façade is secured axially via the thread, which increases the pull-out strength. This results in fewer fastening points and an ultimately more economical façade construction. Thanks to the full thread, the sole function of the head is to fit the screw drive. As such, the HECO-TOPIX-plus façade screw has a small raised countersunk head with milling ribs, which allows simple, concealed installation preventing any water penetration through the screw. The screws are made of stainless steel A2, which safely eliminates the problem of corrosion caused by exposure to weather – for instance, rusting screws.
HECO-TOPIX-plus Floorboard screw
HECO-TOPIX-plus 3.5 x 40, floorboard screw, raised head, T-10, VVG, A3K, 200 pieces
Diameter, d [mm]:
3,5
|
Length, l [mm]:
40
|
Size of recess:
T-10
|
Material:
steel, bright zinc plated, A3K
|
Packaged quantity:
200
Product number: 60293
The HECO-TOPIX-plus Floorboard screw pulls timber components together as it is driven in, leaving no gaps, whilst simultaneously fixing the components via the thread. That allows not only a quick and cost-saving working, but also reliably prevents annoying creaking of the floorboards at the screw shank. As the loads are transferred via the thread, the head is used solely for driving and can be designed very small. It can be used in narrow tongue-and-groove mounting areas and does not overlap in subsequent components. That ensures a precise connection of profiled timber components. In addition the patented HECO-TOPIX drilling tip reduces the splitting of timber, enabling the usage in thinnest profiles with lowest edge distances.
MULTI-MONTI-plus Therm
MMS-plus Therm 7.5 x 180, cylindric head, T-40, A2K, 50 pieces
Length, l [mm]:
180
Product number: 64059
The MULTI-MONTI®-plus Therm screw anchor was specially developed for fastening counter battens to concrete on insulated roofs. Thanks to its wood-concrete double thread, the screw enables a spacer screw connection between the counter batten and concrete. As a result, all compressive forces are transferred from the counter-batten directly into the concrete without the intervening insulation material being affected by the resulting loads. This significantly increases the service life of the insulation and the load-bearing capacity of the counter battens. The screw anchor can be used for all common insulation materials without any requirement for compressive strength and has ETA approval (ETA-23/0078).
HECO-TOPIX-plus A2 3.5 x 40, floorboard screw, cylinder head, T-10, VVG, self-coloured, 200 pieces
HECO-TOPIX-plus A2 3.5 x 40, floorboard screw, cylinder head, T-10, VVG, self-coloured, 200 pieces
Product number: 64655
The HECO-TOPIX-plus Floorboard screw pulls timber components together as it is driven in, leaving no gaps, whilst simultaneously fixing the components via the thread. That allows not only a quick and cost-saving working, but also reliably prevents annoying creaking of the floorboards at the screw shank. As the loads are transferred via the thread, the head is used solely for driving and can be designed very small. It can be used in narrow tongue-and-groove mounting areas and does not overlap in subsequent components. That ensures a precise connection of profiled timber components. In addition the patented HECO-TOPIX drilling tip reduces the splitting of timber, enabling the usage in thinnest profiles with lowest edge distances.