Filter
Filter
–
21
Products
HECO-TOPIX-plus, countersunk head, partial thread, HECO-Drive (TX)
HECO-TOPIX-plus A2 4,0 x 40, countersunk head, HECO-Drive, PT, 200 pcs.
Diameter, d [mm]:
4,0
|
Length, l [mm]:
40
|
Size of recess:
HD-20
|
Material:
Stainless steel A2, self-colour
|
Packaged quantity:
200
Product number: 61677
HECO-TOPIX®-plus is a real screw highlight, combining concentrated technological expertise and wide range of tangible user benefits in a single wood screw. The secret: Our HECO-TOPIX®-plus combines the best properties of four HECO ranges!
With the innovative properties of the HECO-Drive, GripFit, MagicClose and PerfectPitch, a new, integrated drive size concept and high-quality system accessory, HECO-TOPIX®-plus is the perfect wood screw for practically all applications.
You benefit not only from the impressive technological advantage, but also above all
from simple handling and optimum performance.
HECO-TOPIX-plus Cladding screw
HECO-TOPIX-plus A2 4,5 x 50, cladding screw, raised countersunk head, HECO-Drive, VFT, 200 pcs.
Diameter, d [mm]:
4,5
|
Length, l [mm]:
50
Product number: 61706
The full thread of the HECO-TOPIX-plus Cladding screw with its variable thread pitch reliably draws the façade boards onto the sub-structure without the head having to be countersunk deep into the timber. The façade is secured axially via the thread, which increases the pull-out strength. This results in fewer fastening points and an ultimately more economical façade construction. Thanks to the full thread, the sole function of the head is to fit the screw drive. As such, the HECO-TOPIX-plus façade screw has a small raised head, which allows simple, concealed installation preventing any water penetration through the screw. The screws are made of stainless steel A2, which safely eliminates the problem of corrosion caused by exposure to weather – for instance, rusting screws.
HECO-TOPIX-plus Decking screw, partial thread
HECO-TOPIX-plus A2 5,0 x 60, decking screw, countersunk head, HECO-Drive, PT, 200 pcs.
Length, l [mm]:
60
|
Material:
Stainless steel A2, self-colour
|
Packaged quantity:
200
Product number: 61766
The stainless steel HECO-TOPIX-plus Decking screw, was specifically developed to meet the requirements of decking board mountings. The anti-friction-coated screw is easy to process and can be countersunk effortlessly due to the small head. The aestethic aspect was considered too - the finish of the stainless steel screws fits perfectly to appealing wood constructions.
HECO-TOPIX-plus, flange head, full thread
HECO-TOPIX-plus A2 8,0 x 100, flange head, T-Drive, FT, 50 pcs.
Diameter, d [mm]:
8,0
|
Length, l [mm]:
100
|
Size of recess:
T-40
|
Material:
Stainless steel A2, self-colour
|
Packaged quantity:
50
Product number: 61853
The HECO-TOPIX-plus Flange head screw is specially designed for wood construction applications. It features a larger head diameter and is able to transfer considerably higher loads, due to the increased clamping surface. In addition, the amount of required fastening points is significantly reduced. The part-threaded version features shank ribs, which reduce the driving torque and ensure a tension-free connection. Easy and quick insertion is enabled by the optimally formed thread pitch. Further, the patented HECO-TOPIX-plus tip ensures a reduced splitting of timber, and allows a quick processing without pre-drilling and sinking.
HECO-TOPIX-plus Decking screw, secondary thread
HECO-TOPIX-plus A2 5,0 x 60, decking screw, raised countersunk head, HECO-Drive, ST, 200 pcs.
Length, l [mm]:
60
|
Material:
Stainless steel A2, self-colour
|
Packaged quantity:
200
Product number: 61769
The HECO-TOPIX-plus TCS (Timber Construction Screw) is a European technically approved countersunk head screw with HD-30 drive and a diameter of 5.0 mm. Specially designed for wood construction work, the HECO-TOPIX-plus TCS has the same drive size as the 6.0 mm diameter variant, thus saving the user from having to change bits. The innovative features HECO-Drive, GripFit, MagicClose and PerfectPitch make it the perfect screw for wood-wood applications. The 60° head with cutting ribs is not suitable for fitting assembly.
HECO-TOPIX-plus Floorboard screw
HECO-TOPIX-plus A2 3,5 x 50, floorboard screw, raised countersunk head, T-Drive, VFT, 200 pcs.
Diameter, d [mm]:
3,5
|
Length, l [mm]:
50
|
Size of recess:
T-10
|
Material:
Stainless steel A2, self-colour
|
Packaged quantity:
200
Product number: 61651
The HECO-TOPIX-plus Floorboard screw pulls timber components together as it is driven in, leaving no gaps, whilst simultaneously fixing the components via the thread. That allows not only a quick and cost-saving working, but also reliably prevents annoying creaking of the floorboards at the screw shank. As the loads are transferred via the thread, the head is used solely for driving and can be designed very small. It can be used in narrow tongue-and-groove mounting areas and does not overlap in subsequent components. That ensures a precise connection of profiled timber components. In addition the patented HECO-TOPIX drilling tip reduces the splitting of timber, enabling the usage in thinnest profiles with lowest edge distances.
HECO-TOPIX-plus Post screw
HECO-TOPIX-plus 8,0 x 60, flange head, T-Drive, FT, HP, 100 pcs.
Diameter, d [mm]:
8,0
|
Length, l [mm]:
60
|
Size of recess:
T-40
|
Packaged quantity:
100
Product number: 61234
The HECO-TOPIX-plus post screw is ideal for the fastening of wood components on wood connectors like base plates, post supporters or rammed base studs. The flange head ensures a planar pressing against the timber connector. The reinforced shaft secures the screw in the fitting. The HP (High-Protect) coating enables a high corrosion resistance.
HECO-TOPIX-plus, flange head, partial thread
HECO-TOPIX-plus A2 8,0 x 160, flange head, T-Drive, PT, 50 pcs.
Diameter, d [mm]:
8,0
|
Length, l [mm]:
160
|
Size of recess:
T-40
|
Material:
Stainless steel A2, self-colour
|
Packaged quantity:
50
Product number: 61868
The HECO-TOPIX-plus flange head screw is specially designed for wood construction applications. It features a larger head diameter and is able to transfer considerably higher loads, due to the increased clamping surface. In addition, the amount of required fastening points is significantly reduced. The part-threaded version features shank ribs, which reduce the driving torque and ensure a tension-free connection. Easy and quick insertion is enabled by the optimally formed thread pitch. Further, the patented HECO-TOPIX-plus tip ensures a reduced splitting of timber, and allows a quick processing without pre-drilling and sinking.
MULTI-MONTI-plus SS, hexagon head with combined washer
MULTI-MONTI-plus SS A4 10,0 x 85, hexagon head with washer, 25 pcs.
Diameter, d [mm]:
10,0
|
Length, l [mm]:
85
|
Size of recess:
SW-13
|
Material:
Stainless steel A4, self-colour
|
Packaged quantity:
25
Product number: 56619
The MULTI-MONTI®-plus A4 (MMS-plus A4) screw anchor is an enhancement of the MULTI-MONTI® A4 concrete screw. It is driven directly into a predrilled hole without a dowel and has load-bearing strength right from the word go. The reinforced toothing on the screw tip cuts an internal thread in the material during insertion. This creates a positive locking connection, which is subsequently used for the anchoring. This not only facilitates the installation procedure, but also guarantees the craftsman a high level of application safety. The MULTI-MONTI®-plus A4 concrete screw can be driven in close to the edge and without a torque wrench and is completely removable.
HECO-TOPIX-plus, countersunk head, full thread, Pozi-Drive
HECO-TOPIX-plus A2 4,0 x 40, countersunk head, Pozi-Drive, VFT, 200 pcs.
Diameter, d [mm]:
4,0
|
Length, l [mm]:
40
|
Size of recess:
PZD-2
|
Material:
Stainless steel A2, self-colour
|
Packaged quantity:
200
Product number: 61676
HECO-TOPIX®-plus is a real screw highlight, combining concentrated technological expertise and wide range of tangible user benefits in a single wood screw. The secret: Our HECO-TOPIX®-plus combines the best properties of four HECO ranges!
With the innovative properties of the HECO-Drive, GripFit, MagicClose and PerfectPitch, a new, integrated drive size concept and high-quality system accessory, HECO-TOPIX®-plus is the perfect wood screw for practically all applications.
You benefit not only from the impressive technological advantage, but also above all
from simple handling and optimum performance.
HECO-TOPIX-plus, countersunk head, full thread, HECO-Drive (TX)
HECO-TOPIX-plus A2 4,0 x 40, countersunk head, HECO-Drive, VFT, 200 pcs.
Diameter, d [mm]:
4,0
|
Length, l [mm]:
40
|
Size of recess:
HD-20
|
Material:
Stainless steel A2, self-colour
|
Packaged quantity:
200
Product number: 62027
HECO-TOPIX®-plus is a real screw highlight, combining concentrated technological expertise and wide range of tangible user benefits in a single wood screw. The secret: Our HECO-TOPIX®-plus combines the best properties of four HECO ranges!
With the innovative properties of the HECO-Drive, GripFit, MagicClose and PerfectPitch, a new, integrated drive size concept and high-quality system accessory, HECO-TOPIX®-plus is the perfect wood screw for practically all applications. You benefit not only from the impressive technological advantage, but also above all from simple handling and optimum performance.
Decking board drill bit
HECO-Decking board drill bit
Variant:
HECO-Decking board drill bit
Product number: 47375
The high-quality HECO-Decking board drill is a combination of drill bit and countersinker, which ensures clean drill holes without splinters.
MULTI-MONTI-plus F, countersunk head
MULTI-MONTI-plus F A4 7,5 x 75, countersunk head, T-Drive, 50 pcs.
Diameter, d [mm]:
7,5
|
Length, l [mm]:
75
|
Size of recess:
T-30
|
Material:
Stainless steel A4, self-colour
|
Packaged quantity:
50
Product number: 52788
The MULTI-MONTI®-plus A4 (MMS-plus A4) screw anchor is an enhancement of the MULTI-MONTI® A4 concrete screw. It is driven directly into a predrilled hole without a dowel and has load-bearing strength right from the word go. The reinforced toothing on the screw tip cuts an internal thread in the material during insertion. This creates a positive locking connection, which is subsequently used for the anchoring. This not only facilitates the installation procedure, but also guarantees the craftsman a high level of application safety. The MULTI-MONTI®-plus A4 concrete screw can be driven in close to the edge and without a torque wrench and is completely removable.
HECO-Decking board clamp
HECO-Decking board clamp
Product number: 49767
The HECO®-Decking board clamp is recommended as mechanical aid for every type of decking. With it you can even set very deformed boards close together so that they suit the pattern of the joints.
MULTI-MONTI-plus P, pan head
MULTI-MONTI-plus P A4 7,5 x 75, pan head, T-Drive, 50 pcs.
Diameter, d [mm]:
7,5
|
Length, l [mm]:
75
|
Size of recess:
T-30
|
Material:
Stainless steel A4, self-colour
|
Packaged quantity:
50
Product number: 52782
The MULTI-MONTI®-plus A4 (MMS-plus A4) screw anchor is an enhancement of the MULTI-MONTI® A4 concrete screw. It is driven directly into a predrilled hole without a dowel and has load-bearing strength right from the word go. The reinforced toothing on the screw tip cuts an internal thread in the material during insertion. This creates a positive locking connection, which is subsequently used for the anchoring. This not only facilitates the installation procedure, but also guarantees the craftsman a high level of application safety. The MULTI-MONTI®-plus A4 concrete screw can be driven in close to the edge and without a torque wrench and is completely removable.
Decking pads
HECO-Decking pads, 8 x 60 x 90 mm, 24 pcs.
Variant:
HECO-Decking pads, 8 x 60 x 90 mm, 24 pcs.
Product number: 49771
The HECO®-Decking pads offer a wide range of constructional wood protection for substructures even on uneven surfaces. A special grain and an optimised arrangement of the rubber pellets, prevent waterlogging, enabling a fast draining of water and a simultaniously stable bearing of the decking construction.
HECO-TOPIX-plus, countersunk head, partial thread, Pozi-Drive
HECO-TOPIX-plus A2 6,0 x 100, countersunk head, Pozi-Drive, PT, 100 pcs.
Diameter, d [mm]:
6,0
|
Length, l [mm]:
100
|
Size of recess:
PZD-3
|
Material:
Stainless steel A2, self-colour
|
Packaged quantity:
100
Product number: 61825
HECO-TOPIX®-plus is a real screw highlight, combining concentrated technological expertise and wide range of tangible user benefits in a single wood screw. The secret: Our HECO-TOPIX®-plus combines the best properties of four HECO ranges!
With the innovative properties of the HECO-Drive, GripFit, MagicClose and PerfectPitch, a new, integrated drive size concept and high-quality system accessory, HECO-TOPIX®-plus is the perfect wood screw for practically all applications.
You benefit not only from the impressive technological advantage, but also above all
from simple handling and optimum performance.
HECO clipper set
HECO clipper set
Product number: 62052
The HECO clipper set including HECO clippers and A2 stainless steel HECO-TOPIX-plus clipper screws, allows invisible fastening of wooden or composite terrace flooring without grooves and ensures a uniform joint pattern.
HECO-Decking spacers, 3-5-7mm set, with 24 pcs.
HECO-Decking spacers, 3-5-7mm set, with 24 pcs.
Product number: 49774
HECO-Decking spacers ensure a homogeneous pattern of joints even with bent decking boards. They are put between the decking boards and preset the desired mounting distance. There are 3 different spacings possible (3mm, 5mm, 7mm). A confounding of sizes is prevented by the colouring of the spacers. The shape of the spacers avoids them slipping between the boards and disappearing into the gaps.
Decking supports
HECO-Decking supports, 35-70 mm adjustable, 42 pcs.
Variant:
HECO-Decking supports, 35-70 mm adjustable, 42 pcs.
Product number: 58010
The HECO® adjustable feet are made of the high-quality hard plastic polypropylene and are used as a substructure for terrace constructions where significant unevenness needs to be compensated. The resilient and weather-resistant adjustment feet are suitable for all materials that can be used for a terrace substructure. If a terrace is created on a surface with a greater gradient, the HECO® adjustable feet are an easy and quick-to-install option for levelling out. Furthermore, the latest generation is able to compensate for slopes of up to 8% thanks to the flexible head. This saves an enormous amount of time in the otherwise very complex alignment of the contact surfaces.
Decking glider sets
HECO-Decking glider set, 80 x centre piece, 80 x decking glider screw
Variant:
HECO-Decking glider set, 80 x centre piece, 80 x decking glider screw
Product number: 48716
The HECO-Decking gliderset unites indirect fastening and spacing, ensuring a constructive protection of timber at the same time. It's suitable for deckings with board widths of 50mm and more and thicknesses of 22 to 40mm, with a centered groove of a width of at least 5mm and a depth of 10mm. The HECO-Decking gliderset also contains the A2 stainless steel HECO-TOPIX decking screws with cylinder head, that were specially adapted for the system. The set ensures even spacings without the need for any other accessories.