Filter
Filter
–
3
Products
MULTI-MONTI-plus SS, hexagon head with combined washer
MULTI-MONTI-plus SS A4 10,0 x 85, hexagon head with washer, 25 pcs.
Diameter, d [mm]:
10,0
|
Length, l [mm]:
85
|
Size of recess:
SW-13
|
Material:
Stainless steel A4, self-colour
|
Packaged quantity:
25
Product number: 56619
The MULTI-MONTI®-plus A4 (MMS-plus A4) screw anchor is an enhancement of the MULTI-MONTI® A4 concrete screw. It is driven directly into a predrilled hole without a dowel and has load-bearing strength right from the word go. The reinforced toothing on the screw tip cuts an internal thread in the material during insertion. This creates a positive locking connection, which is subsequently used for the anchoring. This not only facilitates the installation procedure, but also guarantees the craftsman a high level of application safety. The MULTI-MONTI®-plus A4 concrete screw can be driven in close to the edge and without a torque wrench and is completely removable.
MULTI-MONTI-plus F, countersunk head
MULTI-MONTI-plus F A4 7,5 x 75, countersunk head, T-Drive, 50 pcs.
Diameter, d [mm]:
7,5
|
Length, l [mm]:
75
|
Size of recess:
T-30
|
Material:
Stainless steel A4, self-colour
|
Packaged quantity:
50
Product number: 52788
The MULTI-MONTI®-plus A4 (MMS-plus A4) screw anchor is an enhancement of the MULTI-MONTI® A4 concrete screw. It is driven directly into a predrilled hole without a dowel and has load-bearing strength right from the word go. The reinforced toothing on the screw tip cuts an internal thread in the material during insertion. This creates a positive locking connection, which is subsequently used for the anchoring. This not only facilitates the installation procedure, but also guarantees the craftsman a high level of application safety. The MULTI-MONTI®-plus A4 concrete screw can be driven in close to the edge and without a torque wrench and is completely removable.
MULTI-MONTI-plus P, pan head
MULTI-MONTI-plus P A4 7,5 x 75, pan head, T-Drive, 50 pcs.
Diameter, d [mm]:
7,5
|
Length, l [mm]:
75
|
Size of recess:
T-30
|
Material:
Stainless steel A4, self-colour
|
Packaged quantity:
50
Product number: 52782
The MULTI-MONTI®-plus A4 (MMS-plus A4) screw anchor is an enhancement of the MULTI-MONTI® A4 concrete screw. It is driven directly into a predrilled hole without a dowel and has load-bearing strength right from the word go. The reinforced toothing on the screw tip cuts an internal thread in the material during insertion. This creates a positive locking connection, which is subsequently used for the anchoring. This not only facilitates the installation procedure, but also guarantees the craftsman a high level of application safety. The MULTI-MONTI®-plus A4 concrete screw can be driven in close to the edge and without a torque wrench and is completely removable.