The high-quality HECO-Decking board drill is a combination of drill bit and countersinker, which ensures clean drill holes without splinters.

The HECO®-Decking board clamp is recommended as mechanical aid for every type of decking. With it you can even set very deformed boards close together so that they suit the pattern of the joints.

The HECO®-Decking pads offer a wide range of constructional wood protection for substructures even on uneven surfaces. A special grain and an optimised arrangement of the rubber pellets, prevent waterlogging, enabling a fast draining of water and a simultaniously stable bearing of the decking construction.

The HECO clipper set including HECO clippers and A2 stainless steel HECO-TOPIX-plus clipper screws, allows invisible fastening of wooden or composite terrace flooring without grooves and ensures a uniform joint pattern.

HECO-Decking spacers ensure a homogeneous pattern of joints even with bent decking boards. They are put between the decking boards and preset the desired mounting distance. There are 3 different spacings possible (3mm, 5mm, 7mm). A confounding of sizes is prevented by the colouring of the spacers. The shape of the spacers avoids them slipping between the boards and disappearing into the gaps.

The HECO® adjustable feet are made of the high-quality hard plastic polypropylene and are used as a substructure for terrace constructions where significant unevenness needs to be compensated. The resilient and weather-resistant adjustment feet are suitable for all materials that can be used for a terrace substructure. If a terrace is created on a surface with a greater gradient, the HECO® adjustable feet are an easy and quick-to-install option for levelling out. Furthermore, the latest generation is able to compensate for slopes of up to 8% thanks to the flexible head. This saves an enormous amount of time in the otherwise very complex alignment of the contact surfaces.

The HECO-Decking gliderset unites indirect fastening and spacing, ensuring a constructive protection of timber at the same time. It's suitable for deckings with board widths of 50mm and more and thicknesses of 22 to 40mm, with a centered groove of a width of at least 5mm and a depth of 10mm. The HECO-Decking gliderset also contains the A2 stainless steel HECO-TOPIX decking screws with cylinder head, that were specially adapted for the system. The set ensures even spacings without the need for any other accessories.