Chipboard screws

12 Products

HECO-TOPIX-plus, countersunk head, partial thread, HECO-Drive (TX)

Diameter, d [mm]: 6,0 | Length, l [mm]: 120 | Size of recess: HD-30 | Material: Steel, bright zinc plated, A3K | Packaged quantity: 100

HECO-TOPIX®-plus is a real screw highlight, combining concentrated technological expertise and wide range of tangible user benefits in a single wood screw. The secret: Our HECO-TOPIX®-plus combines the best properties of four HECO ranges! With the innovative properties of the HECO-Drive, GripFit, MagicClose and PerfectPitch, a new, integrated drive size concept and high-quality system accessory, HECO-TOPIX®-plus is the perfect wood screw for practically all applications. You benefit not only from the impressive technological advantage, but also above all from simple handling and optimum performance.

Select variant

HECO-TOPIX-plus, countersunk head, full thread, HECO-Drive (TX)

Diameter, d [mm]: 4,0 | Length, l [mm]: 30 | Size of recess: HD-20 | Material: Steel, bright zinc plated, A3K | Packaged quantity: 200

Select variant

HECO-TOPIX-plus, countersunk head, full thread, Pozi-Drive

Diameter, d [mm]: 5,0 | Length, l [mm]: 50 | Size of recess: PZD-2 | Material: Steel, bright zinc plated, A3K | Packaged quantity: 200

Select variant

HECO-TOPIX-plus Glas strip screw

Length, l [mm]: 40 | Material: Stainless steel A2, self-colour | Packaged quantity: 200

The HECO-TOPIX-plus glass strip and floor board screw was specially designed for the work with thin profiles and narrow mounting conditions. Therefore it features a patented drilling tip, which enables a precise positioning and an easy insertion without pre-drilling. Furthermore it reduces the splitting of timber effectively, enabling insertions close to the edge. Due to its high thread-pitch the HECO-TOPIX glass strip and floor board screw can be processed quickly and allows a low driving torque. Its small raised countersunk head enables not only a visually appealing mounting, but can also be sunk accurately due to milling ribs underneath the head, without damaging the structure of the fibres around the screws edge. The result is a clean and flush finish. The HECO-TOPIX glass strip and floor board screw is available as a bright zinc plated or an A2 stainless steel version for outdoor applications and wet rooms.

Select variant

HECO-TOPIX-plus, countersunk head, partial thread, Pozi-Drive

Diameter, d [mm]: 5,0 | Length, l [mm]: 80 | Size of recess: PZD-2 | Material: Steel, bright zinc plated, A3K | Packaged quantity: 200

Select variant

HECO-TOPIX-plus, pan head, full thread

Diameter, d [mm]: 4,0 | Length, l [mm]: 40 | Size of recess: T-20 | Material: Steel, bright zinc plated, A3K | Packaged quantity: 500

Select variant

HECO-TOPIX-plus Back wall screw

Diameter, d [mm]: 5,0 | Length, l [mm]: 60 | Size of recess: T-20 | Packaged quantity: 200

Thanks to the small flange head, the HECO-TOPIX-plus back wall screw is perfect for fastening back walls when constructing furniture.

Select variant

HECO-UFIX MDF screw

Diameter, d [mm]: 4,0 | Length, l [mm]: 60

The HECO-UFIX® is a part-threaded screw with a special shaped spade-like drilling point. It has all the properties required for working with medium-density fibreboard: predrilling effect and pinpoint-accurate insertion, reduced splitting and low driving torque. Another advantage is that the HECO-UFIX® MDF screw has a newly developed drive: the HECO-Drive, a perfectly coordinated system between drive in the screw and the special HD bit. The screws stick-fit into the bit and do not wobble. This allows for one-handed operation without any problems and exact screw guidance. However, the screw is also compatible with any standard T-Drive bit.

Select variant

HECO-TOPIX-plus, countersunk head with centre drill drilled hole, full thread

Diameter, d [mm]: 4,5 | Length, l [mm]: 50

Select variant

HECO-TOPIX-plus, reduced countersunk head, full thread

Length, l [mm]: 16

Select variant

HECO-TOPIX-plus Fitting screw

Diameter, d [mm]: 4,5 | Length, l [mm]: 40 | Size of recess: PZD-2 | Material: Steel, bright zinc plated, A3K | Packaged quantity: 500

The HECO-TOPIX-plus fitting screw is ideal for the fastening of strips, tilt-turn fittings, locking parts and bearings in wood or plastic materials. Its specially for metal fittings adapted head pitch, enables quick insertion without damaging the fittings surface. In addition, the head pitch ensures an ideal braking effect and makes annoying slipping almost impossible. Especially when working with thin materials the HECO-TOPIX-plus fitting screw can't be topped. The patented HECO-TOPIX tip allows a splitting-free insertion even in lowest profiles without pre-drilling.

Select variant

HECO-TOPIX-plus, raised countersunk head, full thread

Diameter, d [mm]: 4,0 | Length, l [mm]: 40 | Size of recess: PZD-2

Select variant

Newsletter