Steel-timber connections

6 Products

HECO-TOPIX-plus, flange head, full thread

Diameter, d [mm]: 8,0 | Length, l [mm]: 100 | Size of recess: T-40 | Material: Steel, bright zinc plated, A3K | Packaged quantity: 50

The HECO-TOPIX-plus Flange head screw is specially designed for wood construction applications. It features a larger head diameter and is able to transfer considerably higher loads, due to the increased clamping surface. In addition, the amount of required fastening points is significantly reduced. The part-threaded version features shank ribs, which reduce the driving torque and ensure a tension-free connection. Easy and quick insertion is enabled by the optimally formed thread pitch. Further, the patented HECO-TOPIX-plus tip ensures a reduced splitting of timber, and allows a quick processing without pre-drilling and sinking.

Select variant

HECO-TOPIX-plus, countersunk head, full thread, HECO-Drive (TX)

Diameter, d [mm]: 5,0 | Length, l [mm]: 60 | Size of recess: HD-20 | Material: Steel, bright zinc plated, A3K | Packaged quantity: 200

HECO-TOPIX®-plus is a real screw highlight, combining concentrated technological expertise and wide range of tangible user benefits in a single wood screw. The secret: Our HECO-TOPIX®-plus combines the best properties of four HECO ranges! With the innovative properties of the HECO-Drive, GripFit, MagicClose and PerfectPitch, a new, integrated drive size concept and high-quality system accessory, HECO-TOPIX®-plus is the perfect wood screw for practically all applications. You benefit not only from the impressive technological advantage, but also above all from simple handling and optimum performance.

Select variant

HECO-TOPIX-plus, countersunk head, full thread, Pozi-Drive

Diameter, d [mm]: 5,0 | Length, l [mm]: 50 | Size of recess: PZD-2 | Material: Steel, bright zinc plated, A3K | Packaged quantity: 200

Select variant

HECO-TOPIX-plus Connector screw, flange head

Length, l [mm]: 120

Select variant

HECO-WS self-drilling dowel

Length, l [mm]: 133 | Packaged quantity: 100

You can assemble high-quality steeltimber joints using the HECO®-WS system. The dowels are inserted in the timber and through the steel plates in a single, time-saving operation without pilot drilling. 3 steel plates up to 5 mm thick or 1 steel plate with up to 10 mm thick can be penetrated (steel grade: S235). Producing joints for framework structures has been a complicated process to date. The new HECO®-WS system reduces the procedure to a few operating steps: 1. fitting the steel plate 2. aligning and fixing it in position 3. inserting the dowel

Select variant

HECO-WR special full thread screw

Diameter, d [mm]: 13,0 | Length, l [mm]: 600 | Size of recess: T-50 | Material: Steel, Durocoat T | Packaged quantity: 25

Countless simple and efficient timber engineering applications are possible, thanks to the comprehensive range of lengths available in the HECO-WR programme. These include timber to timber connections as main/secondary beam connections, rafter/purlin connections and flitch beams. Steel components can also be fitted to timbers with the HECO-WR for end grain connections, frame corners and wind bracings. The HECO-WR fastener is also ideal for compression reinforcement in support areas or tension reinforcement perpendicular to the grain.

Select variant

Newsletter