Wood construction screws

6 Products

Diameter, d [mm]: 16,0 | Length, l [mm]: 0

With the high-capacity HECO-WB system ambitious timber angineers can realise remarkable structural designs competitively. No compromise is necessary when it comes to safty or aesthetics. The benefits of the HECO-WB system convince regarding structural design and cost-efficient processing. The HECO-WB system is developed for lateral tensile reinforcements in pitched and cambered glulam beams or at notches and penetrations.

Select variant

HECO-TOPIX-plus, countersunk head, full thread, HECO-Drive (TX)

Diameter, d [mm]: 8,0 | Length, l [mm]: 200 | Size of recess: HD-40 | Material: Steel, bright zinc plated, A3K | Packaged quantity: 100

HECO-TOPIX®-plus is a real screw highlight, combining concentrated technological expertise and wide range of tangible user benefits in a single wood screw. The secret: Our HECO-TOPIX®-plus combines the best properties of four HECO ranges! With the innovative properties of the HECO-Drive, GripFit, MagicClose and PerfectPitch, a new, integrated drive size concept and high-quality system accessory, HECO-TOPIX®-plus is the perfect wood screw for practically all applications. You benefit not only from the impressive technological advantage, but also above all from simple handling and optimum performance.

Select variant

HECO-TOPIX-plus, cylindric head, full thread

Diameter, d [mm]: 6,0 | Length, l [mm]: 200 | Size of recess: T-30 | Material: Steel, bright zinc plated, A3K | Packaged quantity: 100

The properties of the HECO-TOPIX-plus cylinder head screw are designed specifically for timber construction. It boasts a cylinder head that can be easily sunk into the wood. The full thread allows the transfer of high tensile and compressive forces. At the same time, it significantly reduces the number of fastening points required. The optimal thread pitch ensures easier and quicker insertion. What’s more, the patented HECO-TOPIX tip reduces the splitting effect and enables fast screwing without pre-drilling or countersinking. The result: quick and safe assembly with up to 30 per cent less processing time.

Select variant

HECO-VB wood-concrete composite screw

The production of timber-concrete composite systems can be done simple, safe and economically with the help of HECO-VB-mounting solutions. The fastener geometry especially developed for this application as well as the competent design documents are a basic requirement for an efficient project process, whether in renovation or new build construction. This solution provides a proven and reliable overall system. The requirements of this application are serviced with a well designed product and installation tools.

HECO-WS self-drilling dowel

Length, l [mm]: 133 | Packaged quantity: 100

You can assemble high-quality steeltimber joints using the HECO®-WS system. The dowels are inserted in the timber and through the steel plates in a single, time-saving operation without pilot drilling. 3 steel plates up to 5 mm thick or 1 steel plate with up to 10 mm thick can be penetrated (steel grade: S235). Producing joints for framework structures has been a complicated process to date. The new HECO®-WS system reduces the procedure to a few operating steps: 1. fitting the steel plate 2. aligning and fixing it in position 3. inserting the dowel

Select variant

HECO-WR special full thread screw

Diameter, d [mm]: 13,0 | Length, l [mm]: 600 | Size of recess: T-50 | Material: Steel, Durocoat T | Packaged quantity: 25

Countless simple and efficient timber engineering applications are possible, thanks to the comprehensive range of lengths available in the HECO-WR programme. These include timber to timber connections as main/secondary beam connections, rafter/purlin connections and flitch beams. Steel components can also be fitted to timbers with the HECO-WR for end grain connections, frame corners and wind bracings. The HECO-WR fastener is also ideal for compression reinforcement in support areas or tension reinforcement perpendicular to the grain.

Select variant

Newsletter