MULTI-MONTI®-plus: Now also available in stainless steel!
25 years ago HECO introduced a revolutionary invention. For the anniversary the original is in top form – available in stainless steel too ...
- Largest approved range on the market
- Approved for bricks, solid sandlime brick, perforated sand-lime brick and lightweight concrete
- Approved for fire exposure in masonry
Hexagon head
with fixed washer and MMS+ head marking for easy identification of the anchor even after installation

Largest approved range
for ETA option 1 from diameter 6 mm to 20 mm, including seismics from diameter 10 mm to 20 mm


Fire safety
Approved for fire exposure in masonry and with general construction technique permission
Approved
for bricks, solid sandlime brick, perforated sand-lime brick and lightweight concrete

Ideal core/thread geometry
for easy driving and high load-bearing capacity
MULTI-MONTI®-plus-thread
for the highest level of stress and economical constructions
Easy to install
even with worn drill bits, installation without drill hole cleaning permitted
Up to 3 embedment depths
for more flexibility, suitable for mechanical placement and can be fully loaded immediately


Serrated functional tip
for wear reduction and multiple usage for temporary fastenings in concrete
BlackCut functional tip
Extra hard black phosphate on stainless steel version
MULTI-MONTI®-plus:Can be used for almost any material.




MULTI-MONTI®-plus:Reliable is good. Approved is better.


- European Technical Assessment ETA-15/0784 Screw anchors for anchoring in cracked and uncracked concrete C20/25 to C50/60, size 6 to 20 mm
- European Technical Assessment ETA-15/0785 Dowels for use in concrete C20/25 to C50/60 and prestressed hollowcore concrete slabs C30/37 to C50/60 for redundant non-load-bearing systems, size 6 to 10 mm


- National technical approval Z-21.1-2103 Screw anchors MMS-plus for anchoring in masonry, size 6 to 12 mm
- General construction technique permission Z-21.8-2061 Screw anchors MMS-plus and MMS for multiple use for temporary fastenings in young concrete ≥ 10 N/mm² to ≥ 25 N/mm², size 10 to 20 mm

- National technical approval Z-21.1-1879 MULTI-MONTI baseplate anchors MMS-TC, size 7.5 to 12 mm

- Suitable for regions at risk from seismic activity (Seismic C1 from 10 to 20 mm and seismic C2 from 16 to 20 mm according to ETA-15/0784 option 1)

- Approved for fire exposure in masonry
- Fire tested up to fire resistance class R120
- Fire tested according to RWS 180 for 7.5 mm diameter

- Complies with the requirements of VdS directive CEA 4001 relating to planning and installation of sprinkler systems
More multi than ever before:The MULTI-MONTI®-plus range.

MULTI-MONTI®-plus:Just ready for anything.










Assembly Instructions



