Product description

The screw anchor MULTI-MONTI-plus (MMS-plus), is an enhancement of the concrete screw MULTI-MONTI. Without the need for wall plugs, the certified screw anchor is driven directly into a pre-drilled hole, where it is immediately loadable. Its reinforced toothed concrete thread cuts an internal thread into the building material. This creates a positive locking connection, which is subsequently used for the anchoring.The MULTI-MONTI-plus system is not only fast and easy to mount, but also ensures a secure connection. This is confirmed by the available ETA-certification. The screws can be mounted close to the edge and without a torque wrench, what´s more they can be removed and reused after checking the threads condition.

Your benefits

  • Easy settable screw anchor even in case of worn drills
  • Optimized concrete thread with full threaded variations for highest demands
  • Two embedment depths for more flexibility
  • Settable by means of power-tools and immediately loadbearing
  • Increased product assortment and dimensions for various applications taking design and application areas into account
  • Toothed functional tip reduces the abrasion and thus permits multiple use in temporary fixations
  • Wider approved assortment of products for ETA option 1 from MMS-plus 6, including seismic from diameter 10mm

Technical data

GTIN/EAN: 4019787542746
Product number: 54274
Diameter of clearance hole in the fixture, df [mm]: 75
Diameter, d [mm]: 16,0
Length, l [mm]: 80
Thread length, lg [mm]: 70
Headdiameter, dk [mm]: 24, 24,0
Clamping strength, tfix standard [mm]: 5
Drill diameter, d0 [mm]: 14
Head form: hexagon head
Thread: concrete thread
Size of recess: SW-24
Recess: hexagon head
Material: Steel, bright zinc plated, A2K
Packaged quantity: 25


German DIBt-approval: Z-21.8-2061


Variant: HECO-gauge for checking reusability of MULTI-MONTI-plus Ø16 | Diameter, d [mm]: 15,5 | Length, l [mm]: 36
The HECO-gauges allow a control of MULTI-MONTI-plus screws for reusability, when using them as temporary fastenings. The stainless steel gauge is used for abrasion control of thread diamaters 10 to 20mm.