Filter
Filter
–
3
Products
Diameter, d [mm]:
10,0
|
Length, l [mm]:
85
|
Size of recess:
SW-13
|
Material:
Stainless steel A4, self-colour
|
Packaged quantity:
25
The MULTI-MONTI®-plus A4 (MMS-plus A4) screw anchor is an enhancement of the MULTI-MONTI® A4 concrete screw. It is driven directly into a predrilled hole without a dowel and has load-bearing strength right from the word go. The reinforced toothing on the screw tip cuts an internal thread in the material during insertion. This creates a positive locking connection, which is subsequently used for the anchoring. This not only facilitates the installation procedure, but also guarantees the craftsman a high level of application safety. The MULTI-MONTI®-plus A4 concrete screw can be driven in close to the edge and without a torque wrench and is completely removable.
Diameter, d [mm]:
7,5
|
Length, l [mm]:
75
|
Size of recess:
T-30
|
Material:
Stainless steel A4, self-colour
|
Packaged quantity:
50
The MULTI-MONTI®-plus A4 (MMS-plus A4) screw anchor is an enhancement of the MULTI-MONTI® A4 concrete screw. It is driven directly into a predrilled hole without a dowel and has load-bearing strength right from the word go. The reinforced toothing on the screw tip cuts an internal thread in the material during insertion. This creates a positive locking connection, which is subsequently used for the anchoring. This not only facilitates the installation procedure, but also guarantees the craftsman a high level of application safety. The MULTI-MONTI®-plus A4 concrete screw can be driven in close to the edge and without a torque wrench and is completely removable.
Diameter, d [mm]:
7,5
|
Length, l [mm]:
75
|
Size of recess:
T-30
|
Material:
Stainless steel A4, self-colour
|
Packaged quantity:
50
The MULTI-MONTI®-plus A4 (MMS-plus A4) screw anchor is an enhancement of the MULTI-MONTI® A4 concrete screw. It is driven directly into a predrilled hole without a dowel and has load-bearing strength right from the word go. The reinforced toothing on the screw tip cuts an internal thread in the material during insertion. This creates a positive locking connection, which is subsequently used for the anchoring. This not only facilitates the installation procedure, but also guarantees the craftsman a high level of application safety. The MULTI-MONTI®-plus A4 concrete screw can be driven in close to the edge and without a torque wrench and is completely removable.