Filter
Filter
–
21
Products
Diameter, d [mm]:
4,0
|
Length, l [mm]:
40
|
Size of recess:
HD-20
|
Material:
Stainless steel A2, self-colour
|
Packaged quantity:
200
HECO-TOPIX®-plus is a real screw highlight, combining concentrated technological expertise and wide range of tangible user benefits in a single wood screw. The secret: Our HECO-TOPIX®-plus combines the best properties of four HECO ranges!
With the innovative properties of the HECO-Drive, GripFit, MagicClose and PerfectPitch, a new, integrated drive size concept and high-quality system accessory, HECO-TOPIX®-plus is the perfect wood screw for practically all applications.
You benefit not only from the impressive technological advantage, but also above all
from simple handling and optimum performance.
Diameter, d [mm]:
4,5
|
Length, l [mm]:
50
The full thread of the HECO-TOPIX-plus Cladding screw with its variable thread pitch reliably draws the façade boards onto the sub-structure without the head having to be countersunk deep into the timber. The façade is secured axially via the thread, which increases the pull-out strength. This results in fewer fastening points and an ultimately more economical façade construction. Thanks to the full thread, the sole function of the head is to fit the screw drive. As such, the HECO-TOPIX-plus façade screw has a small raised head, which allows simple, concealed installation preventing any water penetration through the screw. The screws are made of stainless steel A2, which safely eliminates the problem of corrosion caused by exposure to weather – for instance, rusting screws.
Length, l [mm]:
60
|
Material:
Stainless steel A2, self-colour
|
Packaged quantity:
200
The stainless steel HECO-TOPIX-plus Decking screw, was specifically developed to meet the requirements of decking board mountings. The anti-friction-coated screw is easy to process and can be countersunk effortlessly due to the small head. The aestethic aspect was considered too - the finish of the stainless steel screws fits perfectly to appealing wood constructions.
Diameter, d [mm]:
8,0
|
Length, l [mm]:
100
|
Size of recess:
T-40
|
Material:
Stainless steel A2, self-colour
|
Packaged quantity:
50
The HECO-TOPIX-plus Flange head screw is specially designed for wood construction applications. It features a larger head diameter and is able to transfer considerably higher loads, due to the increased clamping surface. In addition, the amount of required fastening points is significantly reduced. The part-threaded version features shank ribs, which reduce the driving torque and ensure a tension-free connection. Easy and quick insertion is enabled by the optimally formed thread pitch. Further, the patented HECO-TOPIX-plus tip ensures a reduced splitting of timber, and allows a quick processing without pre-drilling and sinking.
Length, l [mm]:
60
|
Material:
Stainless steel A2, self-colour
|
Packaged quantity:
200
The HECO-TOPIX-plus TCS (Timber Construction Screw) is a European technically approved countersunk head screw with HD-30 drive and a diameter of 5.0 mm. Specially designed for wood construction work, the HECO-TOPIX-plus TCS has the same drive size as the 6.0 mm diameter variant, thus saving the user from having to change bits. The innovative features HECO-Drive, GripFit, MagicClose and PerfectPitch make it the perfect screw for wood-wood applications. The 60° head with cutting ribs is not suitable for fitting assembly.
Diameter, d [mm]:
3,5
|
Length, l [mm]:
50
|
Size of recess:
T-10
|
Material:
Stainless steel A2, self-colour
|
Packaged quantity:
200
The HECO-TOPIX-plus Floorboard screw pulls timber components together as it is driven in, leaving no gaps, whilst simultaneously fixing the components via the thread. That allows not only a quick and cost-saving working, but also reliably prevents annoying creaking of the floorboards at the screw shank. As the loads are transferred via the thread, the head is used solely for driving and can be designed very small. It can be used in narrow tongue-and-groove mounting areas and does not overlap in subsequent components. That ensures a precise connection of profiled timber components. In addition the patented HECO-TOPIX drilling tip reduces the splitting of timber, enabling the usage in thinnest profiles with lowest edge distances.
Diameter, d [mm]:
8,0
|
Length, l [mm]:
60
|
Size of recess:
T-40
|
Packaged quantity:
100
The HECO-TOPIX-plus post screw is ideal for the fastening of wood components on wood connectors like base plates, post supporters or rammed base studs. The flange head ensures a planar pressing against the timber connector. The reinforced shaft secures the screw in the fitting. The HP (High-Protect) coating enables a high corrosion resistance.
Diameter, d [mm]:
8,0
|
Length, l [mm]:
160
|
Size of recess:
T-40
|
Material:
Stainless steel A2, self-colour
|
Packaged quantity:
50
The HECO-TOPIX-plus flange head screw is specially designed for wood construction applications. It features a larger head diameter and is able to transfer considerably higher loads, due to the increased clamping surface. In addition, the amount of required fastening points is significantly reduced. The part-threaded version features shank ribs, which reduce the driving torque and ensure a tension-free connection. Easy and quick insertion is enabled by the optimally formed thread pitch. Further, the patented HECO-TOPIX-plus tip ensures a reduced splitting of timber, and allows a quick processing without pre-drilling and sinking.
Diameter, d [mm]:
10,0
|
Length, l [mm]:
85
|
Size of recess:
SW-13
|
Material:
Stainless steel A4, self-colour
|
Packaged quantity:
25
The MULTI-MONTI®-plus A4 (MMS-plus A4) screw anchor is an enhancement of the MULTI-MONTI® A4 concrete screw. It is driven directly into a predrilled hole without a dowel and has load-bearing strength right from the word go. The reinforced toothing on the screw tip cuts an internal thread in the material during insertion. This creates a positive locking connection, which is subsequently used for the anchoring. This not only facilitates the installation procedure, but also guarantees the craftsman a high level of application safety. The MULTI-MONTI®-plus A4 concrete screw can be driven in close to the edge and without a torque wrench and is completely removable.
Diameter, d [mm]:
4,0
|
Length, l [mm]:
40
|
Size of recess:
PZD-2
|
Material:
Stainless steel A2, self-colour
|
Packaged quantity:
200
HECO-TOPIX®-plus is a real screw highlight, combining concentrated technological expertise and wide range of tangible user benefits in a single wood screw. The secret: Our HECO-TOPIX®-plus combines the best properties of four HECO ranges!
With the innovative properties of the HECO-Drive, GripFit, MagicClose and PerfectPitch, a new, integrated drive size concept and high-quality system accessory, HECO-TOPIX®-plus is the perfect wood screw for practically all applications.
You benefit not only from the impressive technological advantage, but also above all
from simple handling and optimum performance.
Diameter, d [mm]:
4,0
|
Length, l [mm]:
40
|
Size of recess:
HD-20
|
Material:
Stainless steel A2, self-colour
|
Packaged quantity:
200
HECO-TOPIX®-plus is a real screw highlight, combining concentrated technological expertise and wide range of tangible user benefits in a single wood screw. The secret: Our HECO-TOPIX®-plus combines the best properties of four HECO ranges!
With the innovative properties of the HECO-Drive, GripFit, MagicClose and PerfectPitch, a new, integrated drive size concept and high-quality system accessory, HECO-TOPIX®-plus is the perfect wood screw for practically all applications. You benefit not only from the impressive technological advantage, but also above all from simple handling and optimum performance.
Variant:
HECO-Decking board drill bit
The high-quality HECO-Decking board drill is a combination of drill bit and countersinker, which ensures clean drill holes without splinters.
Diameter, d [mm]:
7,5
|
Length, l [mm]:
75
|
Size of recess:
T-30
|
Material:
Stainless steel A4, self-colour
|
Packaged quantity:
50
The MULTI-MONTI®-plus A4 (MMS-plus A4) screw anchor is an enhancement of the MULTI-MONTI® A4 concrete screw. It is driven directly into a predrilled hole without a dowel and has load-bearing strength right from the word go. The reinforced toothing on the screw tip cuts an internal thread in the material during insertion. This creates a positive locking connection, which is subsequently used for the anchoring. This not only facilitates the installation procedure, but also guarantees the craftsman a high level of application safety. The MULTI-MONTI®-plus A4 concrete screw can be driven in close to the edge and without a torque wrench and is completely removable.
The HECO®-Decking board clamp is recommended as mechanical aid for every type of decking. With it you can even set very deformed boards close together so that they suit the pattern of the joints.
Diameter, d [mm]:
7,5
|
Length, l [mm]:
75
|
Size of recess:
T-30
|
Material:
Stainless steel A4, self-colour
|
Packaged quantity:
50
The MULTI-MONTI®-plus A4 (MMS-plus A4) screw anchor is an enhancement of the MULTI-MONTI® A4 concrete screw. It is driven directly into a predrilled hole without a dowel and has load-bearing strength right from the word go. The reinforced toothing on the screw tip cuts an internal thread in the material during insertion. This creates a positive locking connection, which is subsequently used for the anchoring. This not only facilitates the installation procedure, but also guarantees the craftsman a high level of application safety. The MULTI-MONTI®-plus A4 concrete screw can be driven in close to the edge and without a torque wrench and is completely removable.
Variant:
HECO-Decking pads, 8 x 60 x 90 mm, 24 pcs.
The HECO®-Decking pads offer a wide range of constructional wood protection for substructures even on uneven surfaces. A special grain and an optimised arrangement of the rubber pellets, prevent waterlogging, enabling a fast draining of water and a simultaniously stable bearing of the decking construction.
Diameter, d [mm]:
6,0
|
Length, l [mm]:
100
|
Size of recess:
PZD-3
|
Material:
Stainless steel A2, self-colour
|
Packaged quantity:
100
HECO-TOPIX®-plus is a real screw highlight, combining concentrated technological expertise and wide range of tangible user benefits in a single wood screw. The secret: Our HECO-TOPIX®-plus combines the best properties of four HECO ranges!
With the innovative properties of the HECO-Drive, GripFit, MagicClose and PerfectPitch, a new, integrated drive size concept and high-quality system accessory, HECO-TOPIX®-plus is the perfect wood screw for practically all applications.
You benefit not only from the impressive technological advantage, but also above all
from simple handling and optimum performance.
The HECO clipper set including HECO clippers and A2 stainless steel HECO-TOPIX-plus clipper screws, allows invisible fastening of wooden or composite terrace flooring without grooves and ensures a uniform joint pattern.
HECO-Decking spacers ensure a homogeneous pattern of joints even with bent decking boards. They are put between the decking boards and preset the desired mounting distance. There are 3 different spacings possible (3mm, 5mm, 7mm). A confounding of sizes is prevented by the colouring of the spacers. The shape of the spacers avoids them slipping between the boards and disappearing into the gaps.
Variant:
HECO-Decking supports, 35-70 mm adjustable, 42 pcs.
The HECO® adjustable feet are made of the high-quality hard plastic polypropylene and are used as a substructure for terrace constructions where significant unevenness needs to be compensated. The resilient and weather-resistant adjustment feet are suitable for all materials that can be used for a terrace substructure. If a terrace is created on a surface with a greater gradient, the HECO® adjustable feet are an easy and quick-to-install option for levelling out. Furthermore, the latest generation is able to compensate for slopes of up to 8% thanks to the flexible head. This saves an enormous amount of time in the otherwise very complex alignment of the contact surfaces.
Variant:
HECO-Decking glider set, 80 x centre piece, 80 x decking glider screw
The HECO-Decking gliderset unites indirect fastening and spacing, ensuring a constructive protection of timber at the same time. It's suitable for deckings with board widths of 50mm and more and thicknesses of 22 to 40mm, with a centered groove of a width of at least 5mm and a depth of 10mm. The HECO-Decking gliderset also contains the A2 stainless steel HECO-TOPIX decking screws with cylinder head, that were specially adapted for the system. The set ensures even spacings without the need for any other accessories.